This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

M Axle bearing retainer torque specs

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

M Axle bearing retainer torque specs

Postby Phillip W. Lenke » Tue Mar 24, 2009 11:21 am

Well , we are really into the M now. I was removing the left rear axle, heavy but removed well, bearings seemed great, wanted to replace all gaskets and seals. however while cleaning I found 2 pieces of bearing cages that were broken off somewhere so I had to remove the axle from the hsg, I found that the bearings were replaced and the old parts have been rolling around in there. I have to re-torque the bearing retainer , would like to get the specs if anyone has a good manual, I bought one but really a poor IT manual.
Phil
"Work Hard ,Play Often,Care Always"
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Into Tractors
10+ Years
10+ Years
Posts: 1607
Joined: Sat Jun 03, 2006 8:09 am
Zip Code: 45387
Location: Yellow Springs, Ohio

Re: M Axle bearing retainer torque specs

Postby Into Tractors » Tue Mar 24, 2009 4:47 pm

Well, No help with the bearing retainer, sorry.... :( :( But I'll ask around and see if any of the local farmers might.

However, sure would like to know how that engine is coming along.....Hint Hint....Thought we'd be seeing some pics by now. :wink: :wink:
Mike Duncan
Top
Post Reply

Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 2 guests