This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall 140 touch control repair
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
cubbrian
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
farmall 140 touch control repair
I need to fix a leaky touch control unit on my 1966 140. My question is this: should I do a complete rebuild or just repair the defective part? My preference would be a total rebuild, however the parts guy at one of the local IH dealerships recommended to only repair what is bad. It looks like CaseIH no longer sells a repair kit, each parts has to be ordered seperately.
-
cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: farmall 140 touch control repair
Hi Brian
If it is the same as a 130 which I think it would. I just got a rebuild kit last month. It cost me $110 I think. If you want I can get the part number for you.
Billy
If it is the same as a 130 which I think it would. I just got a rebuild kit last month. It cost me $110 I think. If you want I can get the part number for you.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: farmall 140 touch control repair
They still make them $100 and change.
David
David
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
cubbrian
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: farmall 140 touch control repair
Thanks for the replies. I will visit the dealership to see if they can order it for me.
-
EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: farmall 140 touch control repair
Billy,
Did you do the rebuild yet?
How did it go?
Any tips, or pics?
I'll try to take pics when I do mine.
Did you do the rebuild yet?
How did it go?
Any tips, or pics?
I'll try to take pics when I do mine.
Just Do It !
-
cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: farmall 140 touch control repair
HI Ed
I still do not have the cub put together yet. Its sitting in front of the garage with the front end apart yet. Been too cold out side to work on it much. One of these years I will get a pole barn up that I can work in. My little garage is so full of stuff I can barely walk across it.
Anyways the part # for the gasket kit I got for the 130 is 354007R96 it is a CNH part from my IH dealer.
Best wishes getting your 130 up and running. I was hoping to see pictures of it pushing snow
Billy
I still do not have the cub put together yet. Its sitting in front of the garage with the front end apart yet. Been too cold out side to work on it much. One of these years I will get a pole barn up that I can work in. My little garage is so full of stuff I can barely walk across it.
Anyways the part # for the gasket kit I got for the 130 is 354007R96 it is a CNH part from my IH dealer.
Best wishes getting your 130 up and running. I was hoping to see pictures of it pushing snow
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 5 guests
