This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall h factory wide front ?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
farmall h factory wide front ?
ih wide front for the farmall h . the first one.ih made 2 i have the first style . does any one know if i have to have the adapter plate to mount this axle under the tractor . it looks like it will bolt up but it seems like it will be too far foward . if i mount it forward will the steering arm still work . i am actually missing the steering arm and pin as well as the adapter plate ,so if i really dont need the adapter plate ,that would be one less hi priced hard to find part that i would need .any help wouldbe appreciated .i could only find one pic of this axle installed and the pic is kinda small.
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- Team Cub
- Posts: 17312
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: farmall h factory wide front ?
As I recall, the earlier version had the adjustable wheelbase. The adapter plate was only needed to set it for the shorter wheelbase. I think the Parts Catalog will confirm this and spell out exactly what is needed for each configuration. If you don't have the book, look on the CaseIH web site.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: farmall h factory wide front ?
i looked on the parts breakdown in the it shop manual , it was the same as the one on the case ih website . it shows the adapter plate but says nothing about the 2 differant wheel base lenghts . so if i use it without the adapter plate it would stick way out like a schwartz front end or not so much ?
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- Team Cub
- Posts: 17312
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: farmall h factory wide front ?
On the CaseIH website, the early axle is listed as front axle attachment "with adjustable wheelbase". There is a note at the bottom of the parts list that addresses the plate. I don't know where the Schwartz axle ends up. In the long position, the IH axle is fairly far forward.
-
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
Re: farmall h factory wide front ?
In the long position, the front axle is nearly even with the front edge of the grille. If you put the axle on like this, be careful that you do not bump into something.
Cub Cadets....Engineered for people who know better!
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: farmall h factory wide front ?
do either of you guys have the farmall letter series book , there is a nice pic of a farmall h with this style axle on page 62 . if thats without the adapter plate i think that is what i will do . thanks for all of your input and help .
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: farmall h factory wide front ?
Until I started regularly attending tractor shows about 15 or 20 years ago, I never saw anything except a narrow front on an H, and wide fronts look funny to me.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 74
- Joined: Sun Dec 30, 2007 7:55 pm
- Location: nebraska
Re: farmall h factory wide front ?
Somewhere, I have a photo I took years a go of a 39 M on cutoffs with a WF. The ealy Ih axle stuck out in front of the tractor.The tie rod was out infront of the axle. Grandpa Tom had a 47 M with the same axle configuration.
-
- 10+ Years
- Posts: 1811
- Joined: Thu Sep 25, 2008 9:57 am
- Zip Code: 19320
- eBay ID: 2001fltri
- Tractors Owned: CC108
1948 farmall f cub
1955 farmall f cub
1955 international lo boy
1952 vai case
2005 236B Caterpillar
1999 TDI Jetta MK IV I like!
2008 H.D FLTRI - Location: Pa. southeast
Re: farmall h factory wide front ?
out of curiosity could the same action be taken on a c or super c as far as changing it to a wide front end? thanks
One Life , One Love , A Love Supreme
The only thing new is untold history, Harry Truman
The only thing new is untold history, Harry Truman
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Re: farmall h factory wide front ?
Hi Brian,
I wish I could make it out to the barn to check out how they could be mounted, but as I remember, Mike ('48) and Ike ('49) have the axle mounted in the rear position. Those I've seen with the axle mounted farther forward look really weird to me. Both axles are original IH early style.
Here's a closer shot of Mike...
My '51 M has a Schwartz axle. I think it's a bit more practical....
I wish I could make it out to the barn to check out how they could be mounted, but as I remember, Mike ('48) and Ike ('49) have the axle mounted in the rear position. Those I've seen with the axle mounted farther forward look really weird to me. Both axles are original IH early style.
Here's a closer shot of Mike...
My '51 M has a Schwartz axle. I think it's a bit more practical....
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Team Cub
- Posts: 17312
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: farmall h factory wide front ?
brian kov wrote:do either of you guys have the farmall letter series book , there is a nice pic of a farmall h with this style axle on page 62 . if thats without the adapter plate i think that is what i will do . thanks for all of your input and help .
Looks to me like that axle is set in the short position. The adapter plate can be clearly seen in the picture. Flip over to about page 94. There are several pictures of an MD with an adapter plate in use.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: farmall h factory wide front ?
thanks for all of the help , i looked at the other pics on the other page and i can see the adapter plate , i didnt know how thick it was .i thought it was fairly thin ,but after you point it out now i know what i am lookin at . is there a reason for the two differant length wheel bases ? probably some thing to do with belly mounting impliments of some sort .
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- 10+ Years
- Posts: 2340
- Joined: Tue Sep 20, 2005 4:32 pm
- Zip Code: 40741
- Tractors Owned: 1957 Farmall Cub High Crop
1969 International 140
1975 International Cub
Cub 174 Planter with Row Markers
Cub 201 Planter with Row Markers
No. 27 Corn and Pea Attachments
No. 12 Rotary Weeder Attachment
Pittsburg Carry-Lift
Brookfield Buzz Saw
IH McCormick Seed Plate Test Stand - Location: London, Kentucky
Re: farmall h factory wide front ?
We have an H with an IH factory wide front. We call that part your talking about the Set back plate. You can mount the axle with or without that plate. Without the plate the front sticks out really far and odd looking. Here's a picture of an MD compliments of the archives in the front mounted position:
The plate itself is almost 3/4 inch thick and heavy. You could make it really easily if you had a pattern. I knew we should have traced ours when we had it off.
The plate itself is almost 3/4 inch thick and heavy. You could make it really easily if you had a pattern. I knew we should have traced ours when we had it off.
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: farmall h factory wide front ?
i did think about makin one , but like you said no pattern , it does really stick way out there dont it .
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- 10+ Years
- Posts: 1002
- Joined: Fri Dec 02, 2005 11:16 am
- Location: wampum pa (western )
Re: farmall h factory wide front ?
i finally have the correct adapter plate after making one for an m first only to find out it was too wide but now i have the dimensions of both if any one would need them and after searching for years for the steering arm then having the pin made up , i have all of the parts to install it . woo hoo
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Knob on Front for Hand Crank is Wicked Stuck
by FarmallCubGal » Sun Dec 17, 2023 4:23 pm » in Farmall H, HV, Super H, 300 & 350 - 6
- 2433
-
by FarmallCubGal
Sat Dec 23, 2023 8:54 am
-
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests