This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 97
- Joined: Mon Jul 26, 2004 5:59 pm
- Location: Salem CT
- Contact:
Pulley
is the pulley that is mounted with the sickle bar mower that connects the the pto with the v belt available new? My pulley has about 3/8" wobble in it and I am wondering if that would cause a vibration when running. Bob
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Yes it is, but as stated in other posts, it runs about $75 new.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 97
- Joined: Mon Jul 26, 2004 5:59 pm
- Location: Salem CT
- Contact:
Big dog
Do you think that the runout that I have is a problem or am I trying to make this mower something that it is not. Bob
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Bob the sickle bar mower operates best at about 1/2 to 3/4 speed. The pitman style mower inherently generates a lot of vibration and at full rpm can chatter your teeth. That sounds like a lot of pulley wobble and is probably causing undue wear on the pto bearings.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Bob, assuming you are referring to the pto pulley, and not the one on the sickle, you may have a problem with both the pulley and the pto being worn. My 48 has a used pto shaft on it that is worn so much that a pulley that clamps like the sickle mower or Mott pulley will not clamp down. I have a new shaft, just never have gotten around to putting it in.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
John, I may have mis-read the post, but I assumed that the pulley was tight on the pto shaft but has a wobble or runout indicating that it was bent. (to me)
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
BD, I at first was thinking of the one on the mower, but since that's a screw on it would be difficult for it to wobble unless the shaft was bent, but after I thought about it I thought of the worn pulley hub and pto due to my own experience.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Arizona Mike
- Cub Pro
- Posts: 1952
- Joined: Tue Mar 11, 2003 9:16 pm
- Zip Code: 85615
- Tractors Owned: 6 Cubs and no mas.
1947 Circle series Farmall Cub with Armstrong lift, belt pulley, 5"rims 6" tires, SN 563
1949 Farmall Cub with high crop option and hydraulics
1955 Farmall Cub with fast hitch
1955 International Cub Loboy with fast hitch
1957 Farmall Cub with fast hitch
1959 Farmall Cub with fast hitch - Location: way high up in the Huachuca Mt. at the bottom of a deep dark canyon
Hi Bob
Here's one you may want to watch.
Mike
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 23496&rd=1
Here's one you may want to watch.
Mike
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 23496&rd=1
Who is online
Users browsing this forum: No registered users and 26 guests