Nope, no Solvo-Rust yet... Going to a tool show today, and I'm going to pick up a couple "farm jacks" (those I-beam thingys)...
Of course, worse come to worst, I don't REALLY need to get them apart, I am happy with where they're located, but it's a "while you're in there" kind of thing, you know?
I figure after I get them apart, maybe I can coat them with some NEV-A-SEIZE and it won't happen again for another 50 years.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Adjustable Axles info.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
No joy...
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
JB and Allen:
I have searched the Loctite Web Page, and have come up with nothing. Sooo, I sent them an email requesting info on the product which is sitting right in front of my as I type this post.....
Hopefully in the next couple of days I should get an answer. I asked for outlets for this product in the US and the rest of Canada.
I don't think that the product is only sold in Moncton
, so it should be available at some chain or maybe at parts houses that stock LocTite products.
Anyways here is the product code: 81252
Loctite
Solvo-Rust
Super Penetrating Oil
Penetrant/Rust Inhibitor.
I have searched the Loctite Web Page, and have come up with nothing. Sooo, I sent them an email requesting info on the product which is sitting right in front of my as I type this post.....
Hopefully in the next couple of days I should get an answer. I asked for outlets for this product in the US and the rest of Canada.
I don't think that the product is only sold in Moncton
, so it should be available at some chain or maybe at parts houses that stock LocTite products.
Anyways here is the product code: 81252
Loctite
Solvo-Rust
Super Penetrating Oil
Penetrant/Rust Inhibitor.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
2 Late!
Too late - I gave up! 
With the front bolster coming in a few days, I need to get all the other parts back together and painted and ready, so I settled for "good enough" and left the front axles where they are.
I got the old tires off and am putting on the trailer tires per John's suggestions. The rear turfs are here, and a bunch more parts (gaskets and what not) should be arriving soon.
Getting imperceptibly closer...
With the front bolster coming in a few days, I need to get all the other parts back together and painted and ready, so I settled for "good enough" and left the front axles where they are.
I got the old tires off and am putting on the trailer tires per John's suggestions. The rear turfs are here, and a bunch more parts (gaskets and what not) should be arriving soon.
Getting imperceptibly closer...
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
Who is online
Users browsing this forum: No registered users and 58 guests
