Sat May 17, 2008 12:16 am
I have been working on a b for a little while, and I need to know the pionts gap. I set the gap at .020. Is that close? I tried to look it up on the manuals, but had a hard time.
Sat May 17, 2008 8:02 am
Set the points gap to .013 if you have a magneto and .020 if you have a distributor.
Sat May 17, 2008 9:45 am
Thanks, that will probibably make a big difference.
Sat May 17, 2008 11:05 pm
The B is back up and going!
It through me for a real loop today. I did not realize that the points cover could be put on out of time. After some serious thought I retimed everything, and 2 cranks later it was running.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.