This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Bolt size

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Ron
10+ Years
10+ Years
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Bolt size

Postby Ron » Wed Aug 04, 2004 12:29 pm

Hi All,

Does anyone know what size bolt will fit the hole on the end of the crankshaft? (front)
It looks to be a 9/16 or 5/8.

Thanks,

Ron
1951 Farmall Cub
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:
Contact Bigdog

Postby Bigdog » Wed Aug 04, 2004 1:34 pm

I believe that's a 1/2" - NC
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com
Top
User avatar
Ken (48 Cub)
10+ Years
10+ Years
Posts: 994
Joined: Mon Feb 03, 2003 11:10 am
Zip Code: 40023
Tractors Owned: 1948 FCub
1957 LoBoy
Circle of Safety: Y
Location: KY, Fisherville

Postby Ken (48 Cub) » Wed Aug 04, 2004 2:23 pm

1/2" is correct. Get one at least 5 inches long. It's a deep hole!
Ken, Annie the '48.

I think we gotter if'n she don't jump, Andy Griffith.
Top
Ron
10+ Years
10+ Years
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Bolt size

Postby Ron » Wed Aug 04, 2004 6:27 pm

Thanks to all who responded!!

After I finally got the fan pulley off, I discovered that the threads in my crank
have been gone for some time.
It appears that they were pulled out.

I was able to tap the deeper, smaller hole to a 7/16 x 14 so I would at least have something.
I believe I would have to go up to at least a 5/8 size to re-thread the outer part of the crank.

Thanks again!!

Ron
1951 Farmall Cub
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 53 guests