Hi All,
During the rebuild of my Cub I am thinking of replacing the fan drive pulley.
I found that mine had been broken and welded back together.
My question is, how difficult is it to install a wear sleeve if it is required?
I know the manual shows a installation tool for this.
Has anyone ever done this without using this tool?
Also, how can you tell if you need a wear sleeve?
Thanks,
Ron Henderson
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wear Sleeve installation
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 80
- Joined: Sat Feb 08, 2003 11:23 am
- Location: Columbus, Georgia
Wear Sleeve installation
1951 Farmall Cub
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
Ron,If I remember the one I got from Napa comes with ai nstallation tool?I think it was $11 or $12 bucks.Its not that hard.if you have a press.If not a little harder, Just try not to cock it. I froze my pulley in the (ice box)as my Dad use to call it .Heated the sleeve and Bingo.....ten second job ....
-
- 10+ Years
- Posts: 80
- Joined: Sat Feb 08, 2003 11:23 am
- Location: Columbus, Georgia
Wear Sleeve installation
I talked to Tom at T M Tractors and he told me that the Case I/H dealers have a kit for this as RedNed described.
I ordered one along with about $300 worth of parts to complete the rebuild.
The sleeve kit comes with the sleeve,front seal and installation tool for $13.00.
Thanks,
Ron
I ordered one along with about $300 worth of parts to complete the rebuild.
The sleeve kit comes with the sleeve,front seal and installation tool for $13.00.
Thanks,
Ron
1951 Farmall Cub
-
- 10+ Years
- Posts: 51
- Joined: Tue Mar 04, 2003 7:23 pm
- Zip Code: 17374
- eBay ID: YEVCM
- Circle of Safety: Y
- Location: South Eastern York County, Pennsylvania 17314
-
- 10+ Years
- Posts: 80
- Joined: Sat Feb 08, 2003 11:23 am
- Location: Columbus, Georgia
Wear Sleeve installation
Mac,
I couldn't find a number for the kit.
I called Columbia Tractor and just told one of the parts guys what I was looking for.
He knew what it was and looked the part number up in his book.
I will probably get my order from them sometime next week and will be glad to post the number for this kit.
Or if you want you can give them a call at (518) 828 1781.
They were recommened to me by Tom at T P Tractor Salvage.
They are located in New York state.
Nice folks to deal with, the only down side I can see is that they charge you 8.25% sales tax on your orders. (Och!!)
Ron Henderson
I couldn't find a number for the kit.
I called Columbia Tractor and just told one of the parts guys what I was looking for.
He knew what it was and looked the part number up in his book.
I will probably get my order from them sometime next week and will be glad to post the number for this kit.
Or if you want you can give them a call at (518) 828 1781.
They were recommened to me by Tom at T P Tractor Salvage.
They are located in New York state.
Nice folks to deal with, the only down side I can see is that they charge you 8.25% sales tax on your orders. (Och!!)
Ron Henderson
1951 Farmall Cub
-
- 10+ Years
- Posts: 80
- Joined: Sat Feb 08, 2003 11:23 am
- Location: Columbus, Georgia
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 137
-
by Scott 1234
Tue Nov 07, 2023 8:32 am
-
-
clutch and throwout bearing wear? Attachment(s)
by pett3227b » Fri Mar 18, 2022 8:08 am » in Farmall Cub - 1
- 338
-
by Glen
Fri Mar 18, 2022 8:45 pm
-
-
- 0
- 131
-
by smallfarm
Sat Jun 26, 2021 8:18 am
-
-
1-point Fast Hitch for Cub - Installation Attachment(s)
by lakesurfer » Sun Mar 03, 2024 1:56 pm » in Farmall Cub - 19
- 616
-
by staninlowerAL
Tue Apr 02, 2024 4:44 am
-
-
- 11
- 279
-
by Bob McCarty
Mon Apr 10, 2023 4:38 pm
Who is online
Users browsing this forum: Milli and 4 guests