This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

'48 Cub Project: Needing Hand crank dimensions

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
F-I-T
10+ Years
10+ Years
Posts: 42
Joined: Sat Jul 10, 2004 9:31 pm
Location: Tallahassee, FL
Contact:

'48 Cub Project: Needing Hand crank dimensions

Postby F-I-T » Thu Jul 29, 2004 2:27 pm

Hi:

I would like to build a short stub fitting for the front crank pulley out of round stock, fitted with the appropriate cross pin, with a large nut welded on the outboard end. I want to use it to turn the engine over as I'm working on it.

Can anyone tell me the diameter of the crank stock, and the size of the cross pin? Also, how much sticks out past the far side of the pin?

I'll probably buy a proper hand crank some day, but for now I just need to build spud driver.
Frank-in-Tallahassee
'56 JD 70D // '90 JD 855 // '50 Case VAC // '48 IHC Cub "Boo-Boo" // '41 JD "H"
http://www.fboerger.com
F-I-T's webpage.....ALWAYS under construction !!!

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Dale51
10+ Years
10+ Years
Posts: 568
Joined: Sun Aug 10, 2003 3:39 pm
Location: Wellsville NY

Postby Dale51 » Thu Jul 29, 2004 2:39 pm

If it's been broken I did it.
If its not broken wait till I touch it.

User avatar
F-I-T
10+ Years
10+ Years
Posts: 42
Joined: Sat Jul 10, 2004 9:31 pm
Location: Tallahassee, FL
Contact:

Postby F-I-T » Thu Jul 29, 2004 5:23 pm

Wow! You really CAN find it all on the internet! :lol:
Frank-in-Tallahassee

'56 JD 70D // '90 JD 855 // '50 Case VAC // '48 IHC Cub "Boo-Boo" // '41 JD "H"

http://www.fboerger.com

F-I-T's webpage.....ALWAYS under construction !!!

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Postby Rudi » Thu Jul 29, 2004 5:49 pm

Frank:

We really do try to please :!: :D :roll: :D

Oh, if you click this Chown Tractor Parts, and email David, I am sure he has either a used one or (and I know for a fact he has a couple of these) a new one already made. Very, very reasonable. In fact David, John, or Tom all have used ones at reasonable prices. Hey, it wasn't worth my while to make one, so at the time it was more economical for me to get one from John and Jamie....
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


welderrx
10+ Years
10+ Years
Posts: 202
Joined: Fri Mar 07, 2003 8:17 pm
Zip Code: 00000
Tractors Owned: 52 Cub Fast Hitch 68 Lo-Boy 66 Cub Cadet 125 100 Manure Spreader Wagner Loader
Circle of Safety: Y
Location: Hunterdon County N.J.

Postby welderrx » Sat Jul 31, 2004 3:59 pm

Hi Frank, glad to see that you are now a cub owner, I really enjoyed following along at YT as you redid your VAC , I am still waiting to pick up my VA but you won't find a more knowledgeable bunch of Cub guys anywhere than they have here. T.J.
Blue Mountain Antique Gas and Steam Engine Association


Return to “Farmall Cub”

Who is online

Users browsing this forum: Bill Hudson, Bob McCarty and 31 guests