How To Apply Decals To Your Cub

Tips and tricks on repairs to your Cub’s structure.

Moderator: Team Cub

User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont

How To Apply Decals To Your Cub

Postby George Willer » Tue Mar 11, 2008 8:29 pm

I don't recall anyone posting a how-to on this subject, so here goes, using a method that works well for me.

Here's a decal that is held in place by a "hinge" of masking tape. All outside material has been separated from the graphic using straight edges and a SHARP X-acto knife. The masking tape holds the cut-away parts in place so the decal as a whole can be placed exactly where I want it.

The backer has been removed from the IH logo and it was put in place. The outside has been removed for clarity.

Here's the main part ready to have the backer removed.

The backer is still there, but part of the outside has been removed.

Done! Barney doesn't look nearly as nekkid now!

IMHO, the tape helps to get the decal exactly where I want it, and helps me forge ahead confidently. This method eliminates any need to slide the decal around.
George Willer

The most affectionate creature in the world is a wet dog. Ambrose Bierce

  • Similar Topics
    Last post

Return to “Frame/Sheet Metal”

Who is online

Users browsing this forum: No registered users and 0 guests