This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
final drive
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Thu May 20, 2004 11:21 pm
- Location: Lone Butte B.C.
final drive
Hi i have a 48 cub that is in pretty good shape but the rear end is extremely noisy. Is there any adjustment in the gears that drive the rear wheels or is this a major problem. Thanks Dave
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
- Contact:
David. Welcome to the board and don't forget to read the Announcement and Sticky at the top of the Farmall Cub index posts. Plenty of excellent info there...........
Last edited by Ron L on Thu Jun 03, 2004 6:33 am, edited 1 time in total.
Ron
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
David:
there can be a number of causes for your noise that would require dismantling the rear of the tractor. but before you do that, change the fluid in the transmission and final drives using #90weight and see if that quiets it enough. you can go a little deeper by removing the shifter cover it's a simple way to look at the transmission. just remove the 10 or so screws in the cover and lift off. that will tell you whats up... ie rust, water, gunk, look especially at the oil gallery for the top shaft rear bearing.
if you have water in the transmission, a fill with kerosene or diesel and run it around will clean it up. then refill with #90 gear lube.
hope this helps, otherwise, time to get greasy
there can be a number of causes for your noise that would require dismantling the rear of the tractor. but before you do that, change the fluid in the transmission and final drives using #90weight and see if that quiets it enough. you can go a little deeper by removing the shifter cover it's a simple way to look at the transmission. just remove the 10 or so screws in the cover and lift off. that will tell you whats up... ie rust, water, gunk, look especially at the oil gallery for the top shaft rear bearing.
if you have water in the transmission, a fill with kerosene or diesel and run it around will clean it up. then refill with #90 gear lube.
hope this helps, otherwise, time to get greasy
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
David:
Welcome, Welcome and a 3rd welcome
You have just joined the greatest bunch of people in the Cub family and the best forum on the net.
Please read at the top of this forum the Attention New Members and Guest sticky ok
You might also want to click on the Cub Manuals link below - all kinds of info and links to other HAVE TO READ stuff on maintaining your Cub.
How about a pic of your BC Cub?
Again welcome to the forum and to the Cub Family
Welcome, Welcome and a 3rd welcome
You have just joined the greatest bunch of people in the Cub family and the best forum on the net.
Please read at the top of this forum the Attention New Members and Guest sticky ok
You might also want to click on the Cub Manuals link below - all kinds of info and links to other HAVE TO READ stuff on maintaining your Cub.
How about a pic of your BC Cub?
Again welcome to the forum and to the Cub Family
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Hi Dave
Glad to see you here. From my point of view I would change all the fluids. It is an cheap investment. The trans just seems to draw water. The 1st-reverse shifting fork in mine was broken when I got it because someone tried to move it when there was ice in the trans. I would change the fluids and see how it sounds. If you don't use it in winter you can use the heaver 140# gear oil.
Good luck
Glad to see you here. From my point of view I would change all the fluids. It is an cheap investment. The trans just seems to draw water. The 1st-reverse shifting fork in mine was broken when I got it because someone tried to move it when there was ice in the trans. I would change the fluids and see how it sounds. If you don't use it in winter you can use the heaver 140# gear oil.
Good luck
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
Who is online
Users browsing this forum: No registered users and 42 guests