This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
pressure plate adjustment
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 69
- Joined: Fri Jul 18, 2003 11:24 am
- Zip Code: 01085
- Tractors Owned: 1951 cub
1963 cub - Location: Massachusetts
pressure plate adjustment
I need to replace the pressure plate in my 63 and the replacement should be arriving in the next day or so. It is my understanding that the height of the fingers will need to be adjusted. This is where I would appreciate some pointers from the experts. I assume this is done after the disk and pressure plate are bolted to the flywheel. What is the set height of the fingers and what is the easiest way to do this adjustment? Any and all advice will be greating appreciated.
Peter
1951 Cub, 1963 Cub
1951 Cub, 1963 Cub
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Peter, adjust the fingers so there is 1 1/8 to 1 1/4" between the flat surface of the plate and the fingers. The distance isn't as critical as making sure that all 3 are the same height. Do this after you have the assembly on the flywheel and before you put the halves of the tractor back together.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 69
- Joined: Fri Jul 18, 2003 11:24 am
- Zip Code: 01085
- Tractors Owned: 1951 cub
1963 cub - Location: Massachusetts
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 219
-
by Binky Tremain
Wed Sep 15, 2021 10:05 pm
-
- 13
- 277
-
by Dale Finch
Tue Jul 26, 2022 8:35 pm
-
- 8
- 288
-
by Barnyard
Sun Oct 31, 2021 10:07 pm
-
- 13
- 1671
-
by Super A
Thu Jun 08, 2023 8:12 am
-
- 30
- 851
-
by Pap
Fri Jun 11, 2021 11:39 am
Who is online
Users browsing this forum: Crimson Tim and 1 guest