doing a favor for a friend. her 2000 blazer has developed a wheel bearing noise again. right side was done at dealer for $650, now the left is going bad.
what size is the axle nut 34, 35,or 36 mm? anything special i should watch out for?
thanks, Art
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
front wheel bearings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
front wheel bearings
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
Art, I did one of those for a friend too, but his was older. I think I used 1 5/16" socket. Once you get to that size, metric and SAE won't have much difference and will pretty much interchange. As far as what to look out for,, mainly just your fingers!! Lots of tension on them springs! Support the vehicle and control arm carefully. Good luck!
V.P. of T.S.A. (taking stuff apart)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 236
-
by tldec50
Mon May 09, 2022 7:43 pm
-
-
Wheel Thingy? Attachment(s)
by Old Machinist » Wed Dec 21, 2022 10:30 am » in Other Tractors and Machinery - 1
- 238
-
by Urbish
Wed Dec 21, 2022 10:47 am
-
-
- 2
- 445
-
by ajhbike
Mon Jun 14, 2021 4:01 am
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests