Hi guys,
I am ready to put my governor, timing cover, and pulley back onto the front of engine. Thing is, I cannot find the single punch mark on the idler gear to line up the governor. All the other punch marks are lined up. So here is my question. Looking at the front of the engine at the idler gear, with the 2 punch marks lined up with the 2 punch marks on the crank-shaft gear. If you count the gear tooth as 1 from the leftmost punch mark on the idler, how many teeth to where the single punch mark should be?
The idler has 36 teeth altogether. Remember this is a /67 Loboy with a 12v ditributor system, no magneto.
Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor install
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Governor install
Just Do It !
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
E.Z.,
The mark is on the back of the gear. The manual doesn't explain that very well. There are 15 teeth between the two marks.
The mark is on the back of the gear. The manual doesn't explain that very well. There are 15 teeth between the two marks.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
The single punch mark is on the opposite side of the govenor gear. It is on the side away from the front of the engine, the side toward the distributor. You need to paint (white-out works good) the two gear teeth on either side of the double punch mark and I like to paint the back of the tooth on the govenor with the single mark so I can see when they mesh correctly. Be sure to lube the govenor seal and you have to "roll" the govenor into mesh with the timing gear. Also lube the front main seal with a little oil and leave the front cover loose until you have the pulley on so the seal will center itself.
The four most expensive words in tractor restoration: "We might as well..."
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
better to install the large seal after you time the governor assembly.
there is also a mark on the housing on the distributer side at about 2 oclock. the slot for the dist drive will point at it when you are in the correct tooth. assuming you are at TDC#1.
there is also a mark on the housing on the distributer side at about 2 oclock. the slot for the dist drive will point at it when you are in the correct tooth. assuming you are at TDC#1.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Who is online
Users browsing this forum: IHCubCadet147 and 45 guests