Thanks for bringing this back up Eugene. I was looking in the wrong forum for this list. As I begin, I will ask questions along the way.
Don McCombs:
I have ordered my carburetor parts and thanks for your help cleaning it. I will keep you posted.
Paul
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What to do with a Cub you just brought home
-
- 10+ Years
power washing
Brought my Dads 51 cub home on 7-7-07 (it should be lucky). My DH has changed the oil and filter and I have washed at it. It has a lot of greese and dirt and I am a little worried about how much power washing and regular scrubbing I should do. I dont want to mess anything up. Any suggestions.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Just keep the high pressure spray away from the ignition components.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
![Image](http://farmallcub.com/images/ihcc.jpg)
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
![Image](http://farmallcub.com/images/ihcc.jpg)
http://www.cubtug.com
- drspiff
- 10+ Years
- Posts: 914
- Joined: Fri Jan 12, 2007 3:07 pm
- Zip Code: 77802
- Tractors Owned: The '51
Blue Boy
Scout
a host of parts tractors - Location: Aggieland, Texas
True Life Horror Story
I want to emphasize the comments about working through the checklist. Why? I'm working through the front end on my '51 and got to the part about draining the oil in the steering gear. I popped the drain plug loose using the Shade Tree Plug Removal Tool and waited for the old nasty oil to drain into a bucket. And waited and waited.
There was no oil in the steering gear housing. Instead there was 50 year old sludge mixed with a little water. If I had been picking and choosing which things to check, the steering gear would have been low on the list. The steering was not bad, no binding, and after all who would run a tractor and not keep the vital fluids topped up?
Well, I guess that is the point. When I was learning to fly, I was told over and over that you only KNOW the condition of the aircraft if you have checked it yourself. Relying on the best intentions of a crew chief or previous owner is a one way ticket. Admittedly, you are not likely to die if you miss something on your Cub. Although just about everything on a Cub is part of a mission-critical system. So why take the chance of killing your Cub if you overlook an item.
This is not really a rant, rather a statement of how I approach machinery. Your approach may be more casual then mine, and I wish you all the Joy of your Cub.
Rick (an old pilot, not a bold one) Dulas
There was no oil in the steering gear housing. Instead there was 50 year old sludge mixed with a little water. If I had been picking and choosing which things to check, the steering gear would have been low on the list. The steering was not bad, no binding, and after all who would run a tractor and not keep the vital fluids topped up?
Well, I guess that is the point. When I was learning to fly, I was told over and over that you only KNOW the condition of the aircraft if you have checked it yourself. Relying on the best intentions of a crew chief or previous owner is a one way ticket. Admittedly, you are not likely to die if you miss something on your Cub. Although just about everything on a Cub is part of a mission-critical system. So why take the chance of killing your Cub if you overlook an item.
This is not really a rant, rather a statement of how I approach machinery. Your approach may be more casual then mine, and I wish you all the Joy of your Cub.
Rick (an old pilot, not a bold one) Dulas
-
- 10+ Years
- Posts: 70
- Joined: Wed Jul 11, 2007 8:24 pm
- Location: AR, Berryville
- Contact:
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: What to do with a Cub you just brought home
i think ya'll are dead on, a checklist would really help out us new guys. my first cub i brought home, i just focused on getting it started. dry start-up and a trip around the yard ? i'll never know if the blowby out the oil filler was there already, or i caused it. my next cub has been in my shop for a couple months now, going through all the steps to getting it ready for its first start up, ( I WILL PRIME THE OIL PUMP THIS TIME ) thanks to all the help and advice from all of ya'll. sincerly,coppersmythe.......................... ![Oh Yeah, Oh Yeah :-:-):](./images/smilies/Icon_pelvic_thrust.gif)
![Oh Yeah, Oh Yeah :-:-):](./images/smilies/Icon_pelvic_thrust.gif)
-
- 10+ Years
- Posts: 115
- Joined: Sat Apr 07, 2012 10:10 am
- Zip Code: 67235
- Tractors Owned: '48 IHC
- Location: Kansas
- Contact:
Re: What to do with a Cub you just brought home
Ok, I'll admit that I'm the idiot stumped on the very first step. What's a Breather Cup? Is that the black cup at the end of the oil dipstick?
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: What to do with a Cub you just brought home
Aaron:
Item #9
![Image](http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37A%20(5-2-49)/Chassis/Page-25.jpg)
Item #9
![Image](http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37A%20(5-2-49)/Chassis/Page-25.jpg)
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 5+ Years
- Posts: 119
- Joined: Thu Dec 03, 2015 6:28 pm
- Zip Code: 99223
- Tractors Owned: 1948 FCub 13747 "Marie"
1948 FCub 16109 "Lizzie"
1948 FCub 44181 "Gussie"
Cub-54A Leveling & Grader Blade
Cub-22 Mower
Cub-193 Moldboard Plow - Circle of Safety: Y
- Location: Spokane Washington
Re: What to do with a Cub you just brought home
I think I am a little like Eugene about my skepticism regarding the care previous owner's have taken of their equipment. However I will admit to being REALLY REALLY ANAL about maintenance (old pilot). As an example when I buy a used car or truck I "zero" out all of the critical components and maintenance, inspection and service items by changing all lubricants such as engine, transmission, rear end, transfer case oils, belts, hoses, fluids such as brake, steering, coolant and lubricate, oil and grease all service items, rotate tires, align the front end, etc. Expensive yes but my equipment runs for hundreds of thousands of miles. I create an Excel maintenance sheet for the vehicle and track all of the line items of interest and the ones that have time and/or mileage frequency specifications. When the sheet opens the sheet reads the computer's system date and updates the date dependent cells and then after keying in the current vehicle mileage the mileage dependent cells update. Cell colors change to amber when an item is getting close to being due and to red when and item is due or past due. It is the only way I can keep track and "remember".
So, I am doing a similar "zeroing" out of my Cubs as I get to each (I am doing my first one of three). I believe that if I can keep my stiff joints off the floor, minimize the surprises and number of band-aids and blue language, and keep my Cubs functioning, safe, running, working and in one piece then that is "my self imposed cost of use or of my new hobby". Because hours and time are the initial unit's for the determination of when the component, maintenance, inspection and service item is due I will be installing an hour meter on all of my "new" cub acquisitions as I get to them. All Cubs will have an Excel maintenance sheet tailored to each that will help me keep track of their physical and mechanical health.
OK wake up, take a pill. I am done with my novel. Hey we are trying to work or play in the dirt or snow and be safe and have some fun while at it-right?
So, I am doing a similar "zeroing" out of my Cubs as I get to each (I am doing my first one of three). I believe that if I can keep my stiff joints off the floor, minimize the surprises and number of band-aids and blue language, and keep my Cubs functioning, safe, running, working and in one piece then that is "my self imposed cost of use or of my new hobby". Because hours and time are the initial unit's for the determination of when the component, maintenance, inspection and service item is due I will be installing an hour meter on all of my "new" cub acquisitions as I get to them. All Cubs will have an Excel maintenance sheet tailored to each that will help me keep track of their physical and mechanical health.
OK wake up, take a pill. I am done with my novel. Hey we are trying to work or play in the dirt or snow and be safe and have some fun while at it-right?
Return to “Miscellaneous Ideas”
Who is online
Users browsing this forum: No registered users and 2 guests