This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Clutch Problem
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 12
- Joined: Sat Feb 22, 2003 6:57 am
- Zip Code: 01521
- Tractors Owned: 49 Cub
52 Cub - Location: Holland, MA
Clutch Problem
It seems my clutch is not disengaging when the tractor is cold. I have to to start the tractor in gear, it jumps a little then works fine for the rest of the day
"Maine, The Way Lifes Gonna Be"
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Perhaps some moisture?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 420
- Joined: Mon Feb 03, 2003 9:22 am
- Location: TN, Knoxville
Do you of did you have an oil leak at the rear main seal or the oil pump that could have gotton on the disk?
Has the tractor been sitting for a long time?
Once it breaks loose, does it then operate and feel proper?
Oil on the disk, sitting a long time will act like glue. It will have to be burned off with some abuse.
A rough spline or bent spline or a spline that is badly worn will want to try to hold the disk from moving.
Have you ever had it apart?
Just some things to think about.
Has the tractor been sitting for a long time?
Once it breaks loose, does it then operate and feel proper?
Oil on the disk, sitting a long time will act like glue. It will have to be burned off with some abuse.
A rough spline or bent spline or a spline that is badly worn will want to try to hold the disk from moving.
Have you ever had it apart?
Just some things to think about.
YD, Grover and Ole Malley
‘Keepers of the Flame’
‘Keepers of the Flame’
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14
- 595
-
by inairam
Wed Nov 30, 2022 6:47 am
-
- 1
- 303
-
by Dale Finch
Fri Jan 28, 2022 8:35 am
-
- 7
- 254
-
by staninlowerAL
Thu Apr 06, 2023 11:38 am
-
- 5
- 232
-
by 52DAVE
Sat Jan 14, 2023 1:31 pm
-
- 101
- 1641
-
by PFord
Tue Aug 09, 2022 6:06 pm
Who is online
Users browsing this forum: taiterhead and 4 guests