how tight should i tighten the drawbar bolts, also are all the bolts the same length,
Does any one know if the 47 cub with a hand lift , will the pto have to be turning if i add on a hyd. lift for the lift to work my 8-n is like like that my 61 cub i can use lift when the pto is off thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
draw bar bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 131
- Joined: Wed Nov 26, 2003 9:47 pm
- Location: Surry,VA
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Don't know torque settings, but I always used TIGHT. Yes there are different lengths depending on what you are attaching. Too long a bolt can break through teh casting into the final drive gear area resulting in aan oil leak.
All the cub hydralic systems drive off the motor, so the pto does not have to be running, unless you are adding some type aftermarket.
All the cub hydralic systems drive off the motor, so the pto does not have to be running, unless you are adding some type aftermarket.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: Bill V in Md and 59 guests