I rebuilt the TC unit on my '51 SA recently using an IH seal set. Before rebuilding, the unit's right piston would stop working if I put too much down pressure on my grader blade. The left piston still would work. After a while--it varied--the right piston would work again.
After the rebuild, the same thing happens. Is the pressure relief valve sticking in the bore, or is this a normal reaction of the TC unit to over pressure?
I spent my whole boyhood working a SC, including a grader blade and do not remember the SC doing this.
Barn_cub
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What's happening?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 118
- Joined: Fri Feb 16, 2007 10:17 am
- Location: South Alabama, US
- Contact:
What's happening?
Cub herd, 2 Farmall A's, 2 AC's, 1 Ford, 1 JD
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
-
- 10+ Years
- Posts: 118
- Joined: Fri Feb 16, 2007 10:17 am
- Location: South Alabama, US
- Contact:
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 20 guests