This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Farmall Cub w/3pt Spreader

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
WKPoor
10+ Years
10+ Years

Farmall Cub w/3pt Spreader

Postby WKPoor » Tue Feb 03, 2004 2:57 pm

Here is a couple of pics showing some of the good uses a Cub can be put to.
Image
Image
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Jack Donovan
10+ Years
10+ Years
Posts: 876
Joined: Sun Feb 02, 2003 11:19 pm

Postby Jack Donovan » Tue Feb 03, 2004 7:23 pm

Looks almost like Relf's :shock:
Top
Rick ('50, NC)
10+ Years
10+ Years
Posts: 74
Joined: Wed Apr 02, 2003 10:40 am
Location: NC, Autryville

Postby Rick ('50, NC) » Wed Feb 04, 2004 8:15 am

Good pictures, WK.

I see how you beefed up the upper lift arms of the Worksaver hitch. You wrote earlier that you modified or changed the stabilizer. What did you do to that?
My worst day on a Cub is better than my best day at the office!
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Wed Feb 04, 2004 10:43 am

The right hand leg now picks up 2 holes instead of 1 and the sway bars are 3/8" material. The others bent under heavy side loads. So after several straightenings I decided it was time to change to heavier stock. Basically I think the way to avoid breaking something is to spread the stress out over as many bolt holes as possible in the design. The castings must be pretty darn strong as I have put them to the test quite a few times. I'm going to take pictures of all the 3pt pieces individually this week and post them. Bill
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Bb Bob, Dale Finch, Gary Dotson, mcwinter, Peter Person and 51 guests