Hi fellow cubers!! Well, I really love the Cubs, but last weekend I bought a Farmall Super C to use for brushhoging. I really love all the old F-Alls!
Anyway, the tractor has sat for awhile and the fuel tank is gunked up. The guy I bought it from finally got some clean gas strained through it, and it runs pretty doggone good, however I want to clean out the tank. What is the best method for this?
Thanks!
KT
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Gas tank cleaning
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 367
- Joined: Sun Jun 18, 2006 7:49 pm
- Zip Code: 64870
- Tractors Owned: 1950 Cub
- Circle of Safety: Y
- Location: Webb City, Missouri
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Hi KT. When I cleaned mine, this was Al's(Super A) reply on the cleaning method.
Rick
Fellers, you're making this harder than it really is! There is no need to spin, rotate, twist, turn, flip, and especially, no need to dump a bunch of little hardware in the tank that'll be a royal pain to get out!
If you use muriatic acid to clean a rusty tank, all you gotta do is set the tank level on a shop table, preferably where you can get some ventilation because the acid will give off some fumes, not a lot but if you stand right beside it, you'll get a whiff once in a while. Plug the sediment bowl hole, (use a steel plug--the M.A. will "eat" pot metal QUICK) and fill it level-full. I wouldn't use the muriatic acid full strength--I was taught a cup of acid per tank capacity, the rest is water. If you can keep it watched, you can always mix it stronger--just keep it watched, I got in a hurry once and lost a set of radiator shutters.... Full-strength would eat the whole tank out before too long unless you baby-sit it--I have used it straight out of the jug to de-rust small fasteners before and it doesn't take long for them to turn to shiny metal--less than a few minutes. let it sit over night, check it, if you still see rust maybe let it go a little longer. Dump it, flush with baking soda and water, you can then slosh around a half gallon or so of acetone to "dry" it out, and then unless you want coat it, you're ready to go...this method lets the acid solution find every nook and cranny. There will be NO rust when you're done.
I forgot--before you do anything else, if you have any old varnish in the tank, the acid won't eat it, or at least not as fast. Use a can of red devil lye and water to eat the varnish, then go with the acid once that's cleaned out.
As always, PROTECT YOUR EYES (and your skin and clothes) when working with this stuff and just use good sense. It's no more dangerous IMHO that hooking up an electrolysis rig.
Al
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
- Brandon Webb
- 10+ Years
- Posts: 2340
- Joined: Tue Sep 20, 2005 4:32 pm
- Zip Code: 40741
- Tractors Owned: 1957 Farmall Cub High Crop
1969 International 140
1975 International Cub
Cub 174 Planter with Row Markers
Cub 201 Planter with Row Markers
No. 27 Corn and Pea Attachments
No. 12 Rotary Weeder Attachment
Pittsburg Carry-Lift
Brookfield Buzz Saw
IH McCormick Seed Plate Test Stand - Location: London, Kentucky
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 2 guests