1950 super A
I am trying to time the magneto. The manual wants me to crank after tdc and line up the DC1/4 mark on the flywheel is lined up with the ponter on the cluch housing cover. I can't find the dc1/4 mark.
The super A is finished on the outside, but not much good if she doesn't run. Any sugestions?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Trying to find DC/1/4
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
The mark is an arrow on the flywheel. It is very hard to see. If you think of the flywheel as a bowl, it is on the outside, the part the ring gear is pressed onto. It points to the hump in the center of the cover on the front of the bell housing. You will have to look up through the hand hole while someone turns it over real slow and use a bright light. It helps to chalk it when you find it.
Daniel
Daniel
The four most expensive words in tractor restoration: "We might as well..."
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 8 guests