This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
a farmall rear end oil leak
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 96
- Joined: Fri Feb 25, 2005 5:38 pm
- Location: oklahoma
a farmall rear end oil leak
I have a leak and a noise problem. I recently rebuilt this a and this weekend was the first time it had been driven. It is leaking oil from where the real axle housing and the transmission bolt together. I assume that this is probably an oil seal, but when the tractor was driven and high speed there is a knock like a bearing is going out from the same side. Has anyone ever replaced these before? How hard is it?? Any advice? Thanks
Of all the things I have lost I miss my mind the most!!
-
- 10+ Years
- Posts: 96
- Joined: Fri Feb 25, 2005 5:38 pm
- Location: oklahoma
I was able to take off an inspection place and find a bearing out. After looking at my manual it would be the Differential Shaft ball Bearing, and the Differential shaft pinion oil seal. Would anyone have a NAPA cross reference number for these??
Of all the things I have lost I miss my mind the most!!
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 6 guests