Per my earlier post, I have the trans out of my 154.
I want to replace the clutch while I have it apart. from checking the suppliers listed on the site, there seems to be 2 different clutches. Auburn and rockford. but the replacement clutch seems to be able to fit either set up. also the parts manual shows a 2 piece unit and the parts suppliers have a one piece.
can anyone shed some light on what direction to go?
Also is there an adjustment or setting for the pressure plate fingers? or do I just remove and re-install at the same placement.
Thanks again
Dave
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub 154 clutch question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Cub 154 clutch question
Country:
Which Parts Manual are you looking in? I certainly hope it is the TC-131 Parts Catalog. The parts breakdown that you need I think would be found on TC-131 - Parts Catalog - Revision 8 - Power Train - Page 05
CUB IH LO BOY TRACTOR 154 CLUTCH PLATE 184 185
and
CUB IH LO BOY TRACTOR 154 CLUTCH PRESSURE PLATE 184 185
country wrote:Per my earlier post, I have the trans out of my 154.
I want to replace the clutch while I have it apart. from checking the suppliers listed on the site, there seems to be 2 different clutches. Auburn and rockford. but the replacement clutch seems to be able to fit either set up. also the parts manual shows a 2 piece unit and the parts suppliers have a one piece.
can anyone shed some light on what direction to go?
Also is there an adjustment or setting for the pressure plate fingers? or do I just remove and re-install at the same placement.
Thanks again
Dave
Which Parts Manual are you looking in? I certainly hope it is the TC-131 Parts Catalog. The parts breakdown that you need I think would be found on TC-131 - Parts Catalog - Revision 8 - Power Train - Page 05
CUB IH LO BOY TRACTOR 154 CLUTCH PLATE 184 185
and
CUB IH LO BOY TRACTOR 154 CLUTCH PRESSURE PLATE 184 185
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 11
- Joined: Sun Apr 08, 2007 6:15 pm
Cub 154 clutch question
Rudi
that is what the clutch looks like and that is the parts manual link I was using
here is what I found, is it correct?
http://www.tmtractor.com/new/cl/521fp.htm
Dave
that is what the clutch looks like and that is the parts manual link I was using
here is what I found, is it correct?
http://www.tmtractor.com/new/cl/521fp.htm
Dave
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
You are looking at the offset cub / cub lo-boy clutch disc on TM's site. That is different from your 154 lo-boy clutch.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 11
- Joined: Sun Apr 08, 2007 6:15 pm
Cub 154 clutch question
can you point me in the right direction?
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Call Bermuda Ken at Carter & Gruenewald. He will have what you need.
Website is http://www.cngco.com
800 # is on the website.
Website is http://www.cngco.com
800 # is on the website.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 10 guests