Sun Apr 15, 2007 8:07 pm
Sun Apr 15, 2007 8:29 pm
TexCub wrote:Does anyone know where I can find a table that compares engine serial #'s to tractor serial #'s? I need to order a generator belt and I know that my front bolster is a transplant. The majority of my casting dates are from mid 1953.
Based on TM's ranges on the correct belt, it appears somewhere mid-1953 is when one belt was replaced with another. Maybe something else can tell me which one I need. I don't have the magneto setup, my engine serial # is 37456. If I could finds general dates corresponding to the block serial # then I'd know which one I needed.
And since my casting dates are from around the time of the generator belt switch, I'm at a loss. Thanks for any help finding this table or explaining why one might need one belt vs. the other!!!
Sun Apr 15, 2007 8:47 pm
Sun Apr 15, 2007 9:42 pm
TexCub wrote:Thanks, Rudi!!! I didn't even consider there were revisions to the "TC-37F" catalog. Only makes sense! The only consolation I find in asking these simple questions is that one day I'll be able to answer them for somebody else!!!!
Mon Apr 16, 2007 7:14 pm
Mon Apr 16, 2007 8:41 pm
Clark Thompson wrote:there is a easy way to tell what generator belt your tractor will need. If it has the small generator drive pulley on the fanhub then it will take a 21 inch belt. if it has the large drive pulley then it will need the 22inch belt. the small generator drive pulley is close to the same diameter as the fan drive pulley. the larger generator drive pulley is larget then the fan drive pulley.