This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
which battery charger do you use
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 227
- Joined: Sun Jul 30, 2006 10:55 pm
- Location: okla
which battery charger do you use
I been looking at battery charger at harbor freight and northen tool web site. Do any of yall have a favorite or one that stands above the rest? Not looking to spend over $30.00. Just a good one to use on the electrolosis(sp) tank.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: which battery charger do you use
2 Busy wrote:I been looking at battery charger at harbor freight and northen tool web site. Do any of yall have a favorite or one that stands above the rest? Not looking to spend over $30.00. Just a good one to use on the electrolosis(sp) tank.
2 Busy:
I posted this in answer to your previous questions in your Another electrolisis thread. I kind of hope this is what you are needing.
2 Busy:
This is what I use:
Mostly cause I use a cheap charger.. This one currently lists at $39.99 and is not on sale. Mine was on sale for $29.99 I think...
Motomaster Manual Battery Charger, 6/2A
Also, here is another related thread.. Electrolysis Before and After? and the new Where Do I find TSP in the US and What Charger to Use?. They might be of some use.
and then a bit later:
By reading your post, you have a battery inbetween the automatic charger and the tank. Ok .. that works.. as long as the battery requires a charge and that is the rub..
If you want to use the tank, and get good results quickly, invest in a CHEAP charger..
Here is one comparable to the one I use..
Century Welders Battery Charger — 2/6 Amp, 6/12 Volt and it is only $29.95US...
And it is not automatic... plug it in and forget it for awhile..
I went to Harbor Freight and searched Battery Chargers and these are what I found.
10/2/55 BATTERY CHARGER/ENGINE STARTER
Nope.. it has the automatic feature.
Chicago 6/12 VOLT BATTERY CHARGER
Nope.. it has the automatic feature.
12/24 VOLT AUTOMATIC CUT-OFF BATTERY CHARGER $39.99
12V OPTIMUM LEVEL BATTERY CHARGER $39.99
15/2/100 AMP BATTERY CHARGER $69.99
All Nope.. it has the automatic feature and are over your $30.00 limit.
And this one: 12 VOLT BATTERY CHARGER/TESTER $39.99 on sale for $29.99
also is automatic.
I guess the best bet will be the Northern Tool item or similar locally sourced.
Again, hope this helps...
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 227
- Joined: Sun Jul 30, 2006 10:55 pm
- Location: okla
Thanks Rudi,
Thats why i asked if there was something to look out for(automatic).
I don't have a battery in between my charger and tank, I have 2 chargers and used 1 to charge the battery for my electric fence. But i tried each charger on the elec tank to see if it made any difference. Both of my chargers will automatically reduce charge rate.
I just didn't know what charger would be correct for this application. Didn't want to buy another charger that wouldn't work.
I tried everything to improve my amp draw but it didn't matter they both would only draw 2 amps and most of the time less.
Thats why i asked if there was something to look out for(automatic).
I don't have a battery in between my charger and tank, I have 2 chargers and used 1 to charge the battery for my electric fence. But i tried each charger on the elec tank to see if it made any difference. Both of my chargers will automatically reduce charge rate.
I just didn't know what charger would be correct for this application. Didn't want to buy another charger that wouldn't work.
I tried everything to improve my amp draw but it didn't matter they both would only draw 2 amps and most of the time less.
-
- Team Cub Mentor
- Posts: 4128
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
I use the extra charger that I got years ago at Sears. I had 2 but one was the special one that will do both 6 and 12 volts. I keep that one free so I can charge the batteries for the Cubs if I have to. Once my tank gets going it will drop to 2 amps also. But it still cleans parts with in a 24 to 48 hour period. If its taking the rust and paint off in that time frame your tank is fine.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Eugene wrote:If you have access to a junk computer. The power supply may make a good source of DC current for your tank.
Auctions and garage sales frequently have battery chargers for a couple of bucks. Even the nonfunctional chargers can usually be easily repaired.
Eugene
Eugene:
Seeing as I have like dozens of old AT power supplies.. and yes they have 12volt outputs.. but the amperage I am not sure of... might work. I have been thinking on that as a solution as well. However, one problem with junk computers.. it is usually the power supply that makes em junk Also, I think the computer p/s use 20ga wire????
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
Well....
To anyone who wants it.....I've a 12V power supply from an old RV...you'd need an ameter, and possibly some sort of potentiometer to reduce current flow, if it were too high......
I believe these things were capable of happily producing 40 or so amps in continuous service........
If this is useful to anyone, let me know, and it's yours...
--Tom
To anyone who wants it.....I've a 12V power supply from an old RV...you'd need an ameter, and possibly some sort of potentiometer to reduce current flow, if it were too high......
I believe these things were capable of happily producing 40 or so amps in continuous service........
If this is useful to anyone, let me know, and it's yours...
--Tom
-
- 10+ Years
- Posts: 1132
- Joined: Sun May 29, 2005 1:21 pm
- Zip Code: 04762
- Location: ME, New Sweden
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Nik - it would clean faster but unless closely monitored, it could also cause damage to the parts being cleaned. Remember, these parts are giving up particles other than just rust.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 1132
- Joined: Sun May 29, 2005 1:21 pm
- Zip Code: 04762
- Location: ME, New Sweden
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Bigdog wrote:Nik - it would clean faster but unless closely monitored, it could also cause damage to the parts being cleaned. Remember, these parts are giving up particles other than just rust.
I don't believe that is correct. The anode may continue to loose some material. But the process is basicly doing reduction on the oxides coating the parts being cleaned. If the oxides are gone, the process should essentially stop, even with voltage still applied.
I may be totally wrong.
I think I saw some instructions on using a computer power supply for this process somewhere on the web. As I recall, you have to be careful about the set-up to not blow up the power supply. Evidently they fail if powered up with no load, maybe they need a load on both the 5 and 12 volt outputs.
-
- 10+ Years
kinelbor wrote:This is a little off topic, but is that how they chrome stuff? Use the part to be chromed as the "collector" and then put a raw piece of chromium? in and let it transfer and plate the part?
I believe that the reaction you would get from a piece of "pure" chromium in a tank full of water would be interesting to say the least......
A solution of chromium salts is the way it works.... The part to be chromed is the "anode".......
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
400lbsonacubseatspring wrote:kinelbor wrote:This is a little off topic, but is that how they chrome stuff? Use the part to be chromed as the "collector" and then put a raw piece of chromium? in and let it transfer and plate the part?
I believe that the reaction you would get from a piece of "pure" chromium in a tank full of water would be interesting to say the least......
A solution of chromium salts is the way it works.... The part to be chromed is the "anode".......
My understanding is that the cathode is chromium as well. It gives up chromium ions to replace the ions in the solution that are deposited. Maybe I'll look it up. Or not.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
-
- 10+ Years
-
- Similar Topics
- Replies
- Views
- Last post
-
- 52
- 1919
-
by Stanton
Tue Jan 04, 2022 1:44 pm
-
- 14
- 405
-
by john2189
Tue Aug 02, 2022 9:12 am
-
- 5
- 174
-
by Barnyard
Thu May 04, 2023 2:53 pm
-
- 5
- 186
-
by tst
Fri Jul 14, 2023 9:29 am
-
- 6
- 304
-
by Cubfriend
Tue Aug 24, 2021 2:05 pm
Who is online
Users browsing this forum: CaperKen, ericofmaine, ghanlin and 0 guests