What other parts would be required to install this on a Super A? Would they be difficult to find?
http://cgi.ebay.com/New-Water-Pump-Farm ... dZViewItem
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super A water pump addition
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Super A water pump addition
Luck favors those who are prepared
-
- Team Cub
- Posts: 17306
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
To do the complete conversion, you would also need a water outlet elbow that will take a thermostat (which you also would need). It takes a different fan belt. I don't think you would need a different upper radiator support, but not sure. You should also change the head gasket.
The only part that is probably hard to find would be the outlet. It would have to come from a Farmall C or early U-2 power unit. The Super C outlet takes a larger hose.
I number of people report just putting on the pump without the other parts and getting good results. I assume they are the same guys that fix an overheating truck by removing the thermostat and running it that way.
The only part that is probably hard to find would be the outlet. It would have to come from a Farmall C or early U-2 power unit. The Super C outlet takes a larger hose.
I number of people report just putting on the pump without the other parts and getting good results. I assume they are the same guys that fix an overheating truck by removing the thermostat and running it that way.
-
- 10+ Years
- Posts: 5237
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Most people just put the pump on them and let that be it. Frankly I have always thought that the only time you would need to add a water pump would be if you were just absolutely pulling its living guts out 24/7 when it's 100 deg. outside.
Jim, if you added the upper port for the thermostat, would you have to use the taller Super C, etc. radiator too? Then you would have to get a Super C, etc. grille, etc. etc. etc. and the list goes on......
Bus Driver, FWIW I have a water pump with less than 250 hrs. on it that'll fit a Super A. When I had mine overhauled during restoration, the mechanic thought I needed it. He didn't like the "gurgling" you hear after you shut a thermosyphon cooled engine off. When I got into painting, etc. I took it off and made it thermosyphon again.
Al
Jim, if you added the upper port for the thermostat, would you have to use the taller Super C, etc. radiator too? Then you would have to get a Super C, etc. grille, etc. etc. etc. and the list goes on......
Bus Driver, FWIW I have a water pump with less than 250 hrs. on it that'll fit a Super A. When I had mine overhauled during restoration, the mechanic thought I needed it. He didn't like the "gurgling" you hear after you shut a thermosyphon cooled engine off. When I got into painting, etc. I took it off and made it thermosyphon again.
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- Team Cub
- Posts: 17306
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New Addition and questions
by Rick Spivey » Sat Jan 28, 2023 9:33 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 290
-
by ShawnAgne
Mon Jan 30, 2023 8:49 pm
-
-
-
A/SA/SAV Need to prime the oil pump?
by staninlowerAL » Thu Jan 12, 2023 5:57 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 110
-
by staninlowerAL
Thu Jan 12, 2023 9:33 pm
-
-
-
Hyd pump question on my 54 100
by Goinbroke2 » Fri Jun 04, 2021 8:46 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 317
-
by Goinbroke2
Sun Jun 06, 2021 2:29 pm
-
-
-
Pulling the 100 oil pump. Attachment(s)
by customcutter » Mon May 15, 2023 3:00 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 12
- 621
-
by customcutter
Fri May 19, 2023 7:30 pm
-
-
-
Front Hydrolics pump Attachment(s)
by inairam » Fri Oct 15, 2021 1:01 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 177
-
by inairam
Sun Oct 17, 2021 9:01 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest