I have a steering box that is leaking a small amount of oil from between the two halves. My question is, can a person replace the seal just by splitting the halves, without taking the entire steering box off the tractor?
Michael
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall A leaking steering box
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 8
- Joined: Fri Jun 30, 2006 7:26 pm
Farmall A leaking steering box
1968 JI Case 730D
1941 Farmall A #FAA 45637
1940 Ford 9N #9N32088
1941 Farmall A #FAA 45637
1940 Ford 9N #9N32088
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
I have sealed dirtbike engine/trans cases that leaked on the split seam with Pro Seal silicone in the black tube. I drained the trans oil and used brake clean to make sure the area is free from oil and dirt and then i applied the silicone on the outside over the seam. Then i put an outside spotlite lamp on it for heat overnite and the next day I filled the trans with gear oil and it had no leak and it never leaked again.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 8
- Joined: Fri Jun 30, 2006 7:26 pm
Sorry for not getting back to you all any sooner. Got under the tractor and started cleaning the 60 year old grease off the bolts of the steering box in prep of taking it apart. It became apparent real fast all the bolts where very loose and even missing one. Tighten them all and replaced the missing one and all is fine. Tractor is power washed and waiting sand blasting.
Thanks for the help!
Michael
Thanks for the help!
Michael
1968 JI Case 730D
1941 Farmall A #FAA 45637
1940 Ford 9N #9N32088
1941 Farmall A #FAA 45637
1940 Ford 9N #9N32088
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 5 guests