A good friend of mine just aquired a Fordson Super Major.
Tractor model # 712
Serial# 7923
Hoe 723 series
Component# I9-299
Serial # I0I3
It has a huge loader and bucket but we cannot find a # on it anywhere.
There are levers on it that he doesn't know what they do...would like to have a idea before just giving them a yank!
It has a 4cyl diesel engine; 2 wheel drive; expandable front axle.
There appears to be two clutches???
Anyone knowing Anything about this tractor loader hoe, please post. It seems it was made in Europe? .....not sure.
Please look through both pages of photos, if you know what the levers are for, refer to the photo number with description! Thanks!! )
-Marion
http://www.msnusers.com/SmittysFamilyFunnyFarmPage/fordsonsupermajor.msnw
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
FORDSON SUPER MAJOR help please-NOW WITH PHOTO ALBUM LINK !!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Marion(57 Loboy)
- 10+ Years
- Posts: 688
- Joined: Sat Mar 29, 2003 4:17 pm
- Zip Code: 00000
- Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
- Circle of Safety: Y
- Location: Canton, Ohio
FORDSON SUPER MAJOR help please-NOW WITH PHOTO ALBUM LINK !!
Last edited by Marion(57 Loboy) on Thu Jun 23, 2005 3:34 pm, edited 2 times in total.
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Well heres a start Marion. Only made 4-years. It probably has the Perkins diesel in it the same as My old Ford Diesel backhoe.
Antique Tractor Serial Numbers
Fordson Super Major
Year Starting Serial Number
1961 08A-300001M
1962 08B-740000-A
1963 08C-781370-A
1964 08D-900000-A
You could probably get some answers from this Fordson Forum.
http://www.ytmag.com/fordson/wwwboard1.html
Antique Tractor Serial Numbers
Fordson Super Major
Year Starting Serial Number
1961 08A-300001M
1962 08B-740000-A
1963 08C-781370-A
1964 08D-900000-A
You could probably get some answers from this Fordson Forum.
http://www.ytmag.com/fordson/wwwboard1.html
Then came Bronson
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
- Marion(57 Loboy)
- 10+ Years
- Posts: 688
- Joined: Sat Mar 29, 2003 4:17 pm
- Zip Code: 00000
- Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
- Circle of Safety: Y
- Location: Canton, Ohio
It has one clutch pedal on the left, and linkage to two clutches that operate at the same time when you press on it.
One clutch is high on the case and the other one low.
There is also a lever on the left just ahed of the clutch pedal that has linkage to some sort of cylinder at the very bottom of the case. ???
One clutch is high on the case and the other one low.
There is also a lever on the left just ahed of the clutch pedal that has linkage to some sort of cylinder at the very bottom of the case. ???
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
Marion,, it's been a couple of years since I've been into a Fordson Major, but the 2 linkages from the pedal would likely be for the clutch, and a clutch-brake to aid in shifting. I don't remember the details of the workings in the clutch housing now, but the 2 stage clutch would work from a single TOB.
The lever that runs down to the cylinder under the tranny case is the PTO lever.
The lever that runs down to the cylinder under the tranny case is the PTO lever.
V.P. of T.S.A. (taking stuff apart)
- Marion(57 Loboy)
- 10+ Years
- Posts: 688
- Joined: Sat Mar 29, 2003 4:17 pm
- Zip Code: 00000
- Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
- Circle of Safety: Y
- Location: Canton, Ohio
The pto lever you mentioned....is it a simple engage-disengage??
What about the lever under the seat then? We thought that was the pto lever...
There's the draft control on the right side of the seat; then there's a lever about 5" long under the seat.....
I'll have to run over there and take a few pics and post them...too hard to describe/visualize I think.
-Marion
What about the lever under the seat then? We thought that was the pto lever...
There's the draft control on the right side of the seat; then there's a lever about 5" long under the seat.....
I'll have to run over there and take a few pics and post them...too hard to describe/visualize I think.
-Marion
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Marion(57 Loboy) wrote:What about the lever under the seat then? We thought that was the pto lever...
There's the draft control on the right side of the seat; then there's a lever about 5" long under the seat.....
-Marion
This may sound stupid but might the lever under the seat be for the seat forward/backward adjustment?.
Also a lot of times depending on how the hydraulics are plumbed there is a push/pull knob on a converter block that separates the hoe from the loader bucket to make them work independantly.
Then came Bronson
- Marion(57 Loboy)
- 10+ Years
- Posts: 688
- Joined: Sat Mar 29, 2003 4:17 pm
- Zip Code: 00000
- Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
- Circle of Safety: Y
- Location: Canton, Ohio
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
by the numbers :)
In picture 1 I see a lift cylinder for the loader and the PS cylinder.
pic 3 is the drag link from the steering box to the control valve (internal) on the PS cylinder
#4, The 2 linkages seem to be one, the clutch pedal hooks to a arm that runs the linkage on to the TOB shaft through the clutch housing (I think).
#5 TOB shaft
#8 would be the lever for the original starter which would have had a mechanical "solonoid". The lever engaged the drive into the ring gear and closed a contact to power the starter.
#9 the end of the starter lever that conected to the mechanical solonoid
#14 that is the engage/disengage for the belt pulley, not the PTO like I said earlier,, sorry about that!
Good pictures, and a pretty cool machine. Them ol' backhoes are a pile of fun!!
pic 3 is the drag link from the steering box to the control valve (internal) on the PS cylinder
#4, The 2 linkages seem to be one, the clutch pedal hooks to a arm that runs the linkage on to the TOB shaft through the clutch housing (I think).
#5 TOB shaft
#8 would be the lever for the original starter which would have had a mechanical "solonoid". The lever engaged the drive into the ring gear and closed a contact to power the starter.
#9 the end of the starter lever that conected to the mechanical solonoid
#14 that is the engage/disengage for the belt pulley, not the PTO like I said earlier,, sorry about that!
Good pictures, and a pretty cool machine. Them ol' backhoes are a pile of fun!!
V.P. of T.S.A. (taking stuff apart)
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 16 guests