This Case vac was converted into a va by someone!----dash tag still good and readable too!
There is no square holes in the casting under the rad. for the cultivator or loader squares to go into!---the other vac that I have has these cutouts!---I assume thats why the owner did the conversion!---tractor has a good working eagle hitch on the rear!
I had my Woods RM-59 mower on it.---right now its all under 5 feet of snow! thanks; sonny
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Case VAC,---sort of!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4119
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
-
- 5+ Years
- Posts: 1
- Joined: Tue Jun 16, 2015 8:49 am
- Zip Code: 48895
Re: Case VAC,---sort of!
Actually that is neither a VAC nor a VA. It is a VAI, the industrial version of the VAC. Extra heavy duty front end and the small 24" rear wheels.
-
- 10+ Years
- Posts: 4119
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: Case VAC,---sort of!
The serial tag on the dash says vac, and the long rear axles have been cut off with a torch, so I don't have a clue of what it is supposed to be! --or what it started out in life as!---I would still like to find that out if possible! any suggestions or ideas would be helpful! thanks; sonny
-
- 10+ Years
- Posts: 524
- Joined: Fri Feb 11, 2011 6:06 pm
- Zip Code: 62995
- Tractors Owned: 1951 Farmall Cub
1950 John Deere A
1949 Farmall Cub
1943 Farmall H
1940 Farmall H
1953 Farmall Super M
1962 Massey Ferguson 65 - Circle of Safety: Y
- Location: Southern Illinois
Re: Case VAC,---sort of!
What year is this beauty ? From what I can see it is a modified VAC. The steering arm and linkage on a VAI is parallel to the ground. The grill on a VAI goes all the way to the bolster, not like the narrow front VAC. I will try to post a couple pictures of my 1950 VAI for you to compare with. Also the shift pattern is different on the VAI.
I am no means a Case expert, but from what I see and have read about the VAI, yours is a owner modified VAC.
Rodney
I am no means a Case expert, but from what I see and have read about the VAI, yours is a owner modified VAC.
Rodney
USAF 1976 - 1996
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Case IH Combine Plant Tour at RPRU
by Bob McCarty » Sun Jun 18, 2023 10:00 am » in Other Tractors and Machinery - 4
- 1221
-
by Eugene
Mon Jun 19, 2023 10:17 am
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 0 guests