Case VAC wire harness

Thu Jan 02, 2014 9:08 pm

We are at it again finishing up our Case VAC. It is all painted now and I have been doing searching for a wiring harness for the tractor. My IH dealer can order them but it is around $230 and stieners is around $200 ish I think. I am just wondering if there are other places that make them and sell cheaper. The IH one comes with battery cables and I have those donated already. Any help would be great.

Also, decals will be needed if there is a better place to get those other than my IH dealer.

Thanks

Re: Case VAC wire harness

Thu Jan 02, 2014 9:24 pm

Try this. http://brillman.com/store/a-tractor/wir ... eries.html. You can call John and he will most likely answer the phone, himself. That way you will be sure to get the right harness.

Re: Case VAC wire harness

Thu Jan 02, 2014 9:33 pm

Jason,

You might also check with Eric at Porch Electric, he may be able to help you on the harness;

http://stores.homestead.com/hstrial-Por ... eFront.bok

On the decals, have you tried Maple Hunter (Indiana)?

Good luck,

Re: Case VAC wire harness

Thu Jan 02, 2014 10:56 pm

Not the fastest, but the cheapest is to purchase spools of electrical wire and wire terminals. Then make up the wiring harness.

For as shop project, pretty educational - - - lot of thought process involved.