Cold Temps And Water In The Tranny Don't Mix

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Cold Temps And Water In The Tranny Don't Mix

Postby ricky racer » Sun Dec 15, 2013 8:11 pm

Got my Power King all back together this afternoon and wanted to take it outside and try the snowblower out and take some pictures to post on Craigslist and the Economy wouldn't move. Careful inspection revealed the rear transmission was frozen. Evidently there was water in the tranny and the temps in the teens meant no moving today. She setting in the barn now with a heat lamp under it. Tomorrow I'll drain the fluid and replace it with fresh gear lube and try it all over again. :evil:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
User avatar
ricky racer
5+ Years
5+ Years
Posts: 2836
Joined: Wed Sep 12, 2007 8:40 pm
Location: Niles / Buchanan, Michigan
Zip Code: 49120
Circle of Safety Award
Circle of Safety: Y

Re: Cold Temps And Water In The Tranny Don't Mix

Postby Barnyard » Sun Dec 15, 2013 8:34 pm

Found that out a couple of years ago when I went to get the Cub to plow snow. I try to avoid that stuff now.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info
User avatar
Team Cub
Team Cub
Posts: 17934
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Return to Other Tractors and Machinery

Who is online

Users browsing this forum: No registered users and 2 guests