Page 1 of 1
Ford 641 fan
Posted: Mon Sep 02, 2013 8:58 am
by raystractors
Anyone ever had a problem with the fan on a 641? I have one that has become loose and hits the sides of the rad. I would like to know what I am getting into before I start, and also what parts may be needed. If it were an IH I would know what to expect, but have had little time working on these fords. Any help would be great! Thanks
Re: Ford 641 fan
Posted: Sun Sep 15, 2013 10:30 pm
by raystractors
Well I had time to take a look at the old ford this weekend, and as some of you may have thought it is the water pump that has given up. It was not as bad as I thought to take it apart, with only two bolts that had to be cut. I hope to have it back running again in a few days.
Re: Ford 641 fan
Posted: Mon Sep 16, 2013 9:43 am
by John *.?-!.* cub owner
glad you got it lined out, I had never seen a 641, so hadn't the faintest idea as to what to look for, but should have thought about the water pump being bad. guess I have spent too long working on tractors that did not have a water pump, so it did not cross my mind.