Our VAC runs and drives but?
Posted: Sat Feb 16, 2013 11:04 pm
Well the kids and I got the old VAC out of the shop on 4 new tires yesterday. I drove it around for about 15 mins before I let the kids go for a spin and eveything seemed to work ok. The kids drove it around for about 30 mins and I would let them take it out of 3rd gear do to safety concerns with them. I jumped on it again and took it for a spin and so after a while the tractor seemed as if it just wanted to stall, so I got off and checked the carb and loosened the needle jet screw a bit and things cleared up. I took it about a half mile and it just all the sudden shut down. Don't know why? It had gas, but it started back up and we drove it another 20 mins and it quit again. I am thinking the carb still has some dirt or rust it. We are using a plastic lawn mower tank now for our pony tank so no rust in the tank issues.
Anyway, when the kids got off, their first words were, "that was a lot of fun, but now I'm really cold," Yes it was about 30 degrees when they took it for a spin. But the big thing is that now they get to see, hear, and test out all the hard work they have been doing since october. It just gives me the chills every time someone asks how our project is going or when the kids comment how much fun they are really having. Who knew it would catch on the way it has.
Things are about to take a big turn as Sandblasting is schedualed the 1st of March after FFA week is over. I have kids waiting to give paining a try, but a real pro is going to do the hood and side panels.
Pics next week when we get it out again.
Thanks again.
Anyway, when the kids got off, their first words were, "that was a lot of fun, but now I'm really cold," Yes it was about 30 degrees when they took it for a spin. But the big thing is that now they get to see, hear, and test out all the hard work they have been doing since october. It just gives me the chills every time someone asks how our project is going or when the kids comment how much fun they are really having. Who knew it would catch on the way it has.
Things are about to take a big turn as Sandblasting is schedualed the 1st of March after FFA week is over. I have kids waiting to give paining a try, but a real pro is going to do the hood and side panels.
Pics next week when we get it out again.
Thanks again.