All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Nov 02, 2012 5:59 pm
Have an older single row JD Digger. PTO Driven. Anyone know where I can get a drive chain? 1.25" Pitch, 5/8" rollers.
Fri Nov 02, 2012 8:33 pm
Wow! That's a tough one. Are you sure the rollers aren't .750 and worn to .625? I realize that's a lot of wear but roller chain with a 1.25 pitch and .625 rollers is not common. You might want to measure the sprocket to verify the 5/8" rollers.
Sat Nov 03, 2012 6:24 am
Yes, I believe .625 was the original roller diameter and length. An odd breed I agree. Have checked with a few chain suppliers, they all say they have run into this before but do not know a chain supplier that can now provide a new chain. Was hoping to keep the original sprockets but may have to upgrade to a different type if I can't come up with a chain. Thanks for your interest.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.