Leaking, bucket tilt, hydraulic control valve.
What is the easiest way to access the control valve? Top or from underside of skid steer?
Have parts and service manuals, but manuals do not explain how to access the valve.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
BobCat 610. Access hydraulic control valve.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 20389
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
BobCat 610. Access hydraulic control valve.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 908
- Joined: Sat Feb 15, 2003 7:20 am
- Zip Code: 00000
Re: BobCat 610. Access hydraulic control valve.
I wish I could help, I had a 743 and I had the control valve off but it was a completely different machine than yours. The only thing I could come up with is:
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=crawlers&th=87972%3E
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=crawlers&th=84672
A person by the name of Charlie did one. If I remember the 610 has a Wisconsin V4.I have a rebuilt one if you need it.
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=crawlers&th=87972%3E
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=crawlers&th=84672
A person by the name of Charlie did one. If I remember the 610 has a Wisconsin V4.I have a rebuilt one if you need it.
-
- Team Cub Mentor
- Posts: 20389
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: BobCat 610. Access hydraulic control valve.
Pressure sprayed the 610 yesterday and today removing much of the built up crud. At least one visible bolt holding the hydraulic valve is accessible from the top and another one from the bottom.
Current plan is to drop off the bucket, then crib the skid steer up to get at least 2 feet of clearance on the under side. Weighs about 2 tons. Makes me wish I had a pit or car hoist.
Rebuilt the Wisconsin V4 engine about 1 1/2 years ago. Winter project.
Current plan is to drop off the bucket, then crib the skid steer up to get at least 2 feet of clearance on the under side. Weighs about 2 tons. Makes me wish I had a pit or car hoist.
Rebuilt the Wisconsin V4 engine about 1 1/2 years ago. Winter project.
I have an excuse. CRS.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7
- 1278
-
by SamsFarm
Thu Apr 27, 2023 10:15 pm
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests