This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Skid steer ?'s
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 94
- Joined: Fri Apr 18, 2008 2:45 pm
- Zip Code: 15057
- Tractors Owned: 4 cubs
J.D. A - Location: PA., Bridgeville
Skid steer ?'s
Looks like I'm going to be pulling the trigger soon on getting a skid steer. Any tips on what to look for or noises to be weiry about? I'use them in the past but must admit I don't know much about them mechanicaly. Thank you in advance for the help.
Caution, When somebody tells you to get a grip, apparently around their neck is not what they ment.
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
-
- 10+ Years
- Posts: 1300
- Joined: Tue Nov 23, 2004 7:21 pm
- Zip Code: 24095
- Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine - Location: Stewartsville, Virginia
Re: Skid steer ?'s
Listen for excessive growling or whineing in the hydostatic drive. That means wear and big $$$.
Slack in control levers and pedals.
The usual engine sounds and smokes you probably know.
Slack in control levers and pedals.
The usual engine sounds and smokes you probably know.
Best,
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Skid steer ?'s
Suggest kicking the tires, look the machine over carefully, test drive.
Don't buy yet. Go home and check the machine's problem areas out on the internet.
Reason, there are a number of different drive mechanisms, engines, control operations, etc..
Don't buy yet. Go home and check the machine's problem areas out on the internet.
Reason, there are a number of different drive mechanisms, engines, control operations, etc..
I have an excuse. CRS.
-
- 10+ Years
- Posts: 908
- Joined: Sat Feb 15, 2003 7:20 am
- Zip Code: 00000
Re: Skid steer ?'s
I had a Bobcat 743 that was used for a rental by the previous owner…. You thank rental cars have a hard life…thank again.
In my opinion Bobcat, Cat, John Deer and New Holland are all good. I borrowed a New Holland track machine the other day to move big round bales of hay and it was powerful and fast.
Tracks seem to be easier to use on pavement and flat surfaces, wheels are better when the surface is rough. (Out in the fields). The New Holland I was using the tracks were worn and the owner uses it on a cattle /hog feeding operation on concrete. I’m thinking that is what is wearing them.
Bobcat’s used several different steering systems, some have straight mechanical linkage, (I think better) and some have hydraulic servos, hoses and linkages. (I had this type and leaked a lot of fluid) Bobcat uses two engines; Perkins (Caterpillar owned), and Isuzu, both reliable engines. On Bobcat’s one of the big things to look out for is the u-joint’s (between the engine & pumps) condition, for some reason they don’t get greased when maintained and will eventually break. On backhoe units; look where the arms pivot at the Backhoe because they crack, but can be welded. Mine were and never cracked again.
I now used my Massey Ferguson 40 Industrial backhoe for all my needs.
In my opinion Bobcat, Cat, John Deer and New Holland are all good. I borrowed a New Holland track machine the other day to move big round bales of hay and it was powerful and fast.
Tracks seem to be easier to use on pavement and flat surfaces, wheels are better when the surface is rough. (Out in the fields). The New Holland I was using the tracks were worn and the owner uses it on a cattle /hog feeding operation on concrete. I’m thinking that is what is wearing them.
Bobcat’s used several different steering systems, some have straight mechanical linkage, (I think better) and some have hydraulic servos, hoses and linkages. (I had this type and leaked a lot of fluid) Bobcat uses two engines; Perkins (Caterpillar owned), and Isuzu, both reliable engines. On Bobcat’s one of the big things to look out for is the u-joint’s (between the engine & pumps) condition, for some reason they don’t get greased when maintained and will eventually break. On backhoe units; look where the arms pivot at the Backhoe because they crack, but can be welded. Mine were and never cracked again.
I now used my Massey Ferguson 40 Industrial backhoe for all my needs.
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Skid steer ?'s
My suggestion would be to find someone who works on such equipment and pay them to give you an impartial evaluation. It will be worth the cost in the long run. You shouldn't have any problem finding someone in your location.
-
- 10+ Years
- Posts: 94
- Joined: Fri Apr 18, 2008 2:45 pm
- Zip Code: 15057
- Tractors Owned: 4 cubs
J.D. A - Location: PA., Bridgeville
Re: Skid steer ?'s
Thanks for the advice guys. At the present moment just looking, but it won't be long before I purchase (if the right machine comes around). I just have to make sure I think about it before I say sold. Thank again.
Caution, When somebody tells you to get a grip, apparently around their neck is not what they ment.
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
-
- 10+ Years
- Posts: 94
- Joined: Fri Apr 18, 2008 2:45 pm
- Zip Code: 15057
- Tractors Owned: 4 cubs
J.D. A - Location: PA., Bridgeville
Re: Skid steer ?'s
Well, I looked at one over the weekend. Called a couple days before to see if it was still available and to get basic ?'s out of the way including "Does it have aux. hydro. for running grapple bucket, etc.. ?" They said sure it has it. So I drive a hour and a half to find out it doesn't. Still drove it & worked it for 10-15 min. Put it back and was walking around it to find hydro leak from one of the lines. Fluid smelled burnt to me. Needless to say that one is still on the lot.
The day wasn't a loss though, because I have an uncle in that area that I don't get to see very often so I spent 4-5 hrs. catching up with him. Overall a good afternoon.
The search continues...
The day wasn't a loss though, because I have an uncle in that area that I don't get to see very often so I spent 4-5 hrs. catching up with him. Overall a good afternoon.
The search continues...
Caution, When somebody tells you to get a grip, apparently around their neck is not what they ment.
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Skid steer ?'s
If you're looking for one with aux fittings, make sure it has a high capacity pump.
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: Skid steer ?'s
You really have to look up the model and year it was made to see what problems it may have. A lot of them had problems certain years and are to be avoided. I got a 2002 JD 250 last year while I had seen some older ones that looked good. But when I started looking them up I found they had lots of problems up to 2000 and made a lot of fixes in 2001.
You want to figure out what the min lift capacity you need is and the gpm of the hyd. Along with physical demision of the smallest area you need to get in. My friend had to go with a small machine since he had to stay less than 73" tall and still get in his barn. For me size didn't matter but I wanted a min of 1500lbs of lift. As I planned on using it in the woods for lifting logs and brush. I ended up with a machine that working lift 1750 or 2100 with the optional weight box which I got and a max lift of 3600lbs. And I have maxed it out a few times.
Track machines are nice but the tracks are expensive and don't hold up well. If you see a cheep one thats because its hard on tracks. Some are better than others. But for the most part you need to be making enough money with it so you can afford to replace them.
Billy
You want to figure out what the min lift capacity you need is and the gpm of the hyd. Along with physical demision of the smallest area you need to get in. My friend had to go with a small machine since he had to stay less than 73" tall and still get in his barn. For me size didn't matter but I wanted a min of 1500lbs of lift. As I planned on using it in the woods for lifting logs and brush. I ended up with a machine that working lift 1750 or 2100 with the optional weight box which I got and a max lift of 3600lbs. And I have maxed it out a few times.
Track machines are nice but the tracks are expensive and don't hold up well. If you see a cheep one thats because its hard on tracks. Some are better than others. But for the most part you need to be making enough money with it so you can afford to replace them.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 5237
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Skid steer ?'s
JackF wrote:I had a Bobcat 743 that was used for a rental by the previous owner…. You thank rental cars have a hard life…thank again.
In my opinion Bobcat, Cat, John Deer and New Holland are all good. I borrowed a New Holland track machine the other day to move big round bales of hay and it was powerful and fast.
Tracks seem to be easier to use on pavement and flat surfaces, wheels are better when the surface is rough. (Out in the fields). The New Holland I was using the tracks were worn and the owner uses it on a cattle /hog feeding operation on concrete. I’m thinking that is what is wearing them.
Bobcat’s used several different steering systems, some have straight mechanical linkage, (I think better) and some have hydraulic servos, hoses and linkages. (I had this type and leaked a lot of fluid) Bobcat uses two engines; Perkins (Caterpillar owned), and Isuzu, both reliable engines. On Bobcat’s one of the big things to look out for is the u-joint’s (between the engine & pumps) condition, for some reason they don’t get greased when maintained and will eventually break. On backhoe units; look where the arms pivot at the Backhoe because they crack, but can be welded. Mine were and never cracked again.
I now used my Massey Ferguson 40 Industrial backhoe for all my needs.
Bobcat did use Kubota engines as well. I really don't know how we survived without a Bobcat. Only down-side is it is always on another job when I wanna use it.... Also tracks are cool but I don't see the cost justification for general use.
One suggestion. Some older ones I have seen do not have a ROPS. If it doesn't have one I would automatically pass. If you have a load in the bucket and need to raise it high, the machine gets very tippy.
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- 10+ Years
- Posts: 94
- Joined: Fri Apr 18, 2008 2:45 pm
- Zip Code: 15057
- Tractors Owned: 4 cubs
J.D. A - Location: PA., Bridgeville
Re: Skid steer ?'s
Thanks for the advice guys. I've looked at a few so far and had to pass on them for various reasons. There is one I'm looking at and as soon as it gets through the shop l'll be able to test drive and go from there. It is a low hr machine and was used on a farm. It should be big enough for the jobs I have planned, just might take alittle longer. The lift is 1700# and wieghs about 5400#. The other ones I've looked at were alittle bigger but had 2,000-2,500 more hrs. Should know more in acouple days.
Caution, When somebody tells you to get a grip, apparently around their neck is not what they ment.
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
-
- 10+ Years
- Posts: 94
- Joined: Fri Apr 18, 2008 2:45 pm
- Zip Code: 15057
- Tractors Owned: 4 cubs
J.D. A - Location: PA., Bridgeville
Re: Skid steer ?'s
Trigger has been pulled. Had a chance to play alittle yesterday. Sorry no action shots so far, I'll wait untill it looks like I know what I'm doing. I have lots of projects around the house for it so I'm sure it won't take long for more pics.
Caution, When somebody tells you to get a grip, apparently around their neck is not what they ment.
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
Common sense isn't so common
4 cubs ( 1 lowboy)
JD A
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Skid steer ?'s
Congratulations. Buy the parts and service manual for the machine.
You will find a skid steer one handy piece of machinery.
Neighbor told me I could have 1/4 mile of barbed wire fence if I would remove it. I dropped and rolled up the barbed wire. Then put son in skid steer with chain over bucket to pull post. Pull a post, throw in bucket. Took us about 30 minutes to pull all the steel fence post, toss in the wire in the bucket and drive off with the loot.
One thing you will find is that skid steers are a royal pain to work on. Currently repairing a hydraulic oil leak on the bucket tilt valve and one wheel seal on a Bob Cat 610. Cost of the repair parts and supplies will be around $40-. If I had to pay shop labor rates, guessing the bill would be close to $1000-.
You will find a skid steer one handy piece of machinery.
Neighbor told me I could have 1/4 mile of barbed wire fence if I would remove it. I dropped and rolled up the barbed wire. Then put son in skid steer with chain over bucket to pull post. Pull a post, throw in bucket. Took us about 30 minutes to pull all the steel fence post, toss in the wire in the bucket and drive off with the loot.
One thing you will find is that skid steers are a royal pain to work on. Currently repairing a hydraulic oil leak on the bucket tilt valve and one wheel seal on a Bob Cat 610. Cost of the repair parts and supplies will be around $40-. If I had to pay shop labor rates, guessing the bill would be close to $1000-.
I have an excuse. CRS.
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Skid steer ?'s
You will never regret buying it. I use mine all the time. I see that you have the bolt-on teeth for the bucket. They will come in handy. So would a set of pallet forks.
-
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
Re: Skid steer ?'s
Don McCombs wrote: So would a set of pallet forks.
Got a set of pallet forks for my tractor. Very helpful Wish I had gotten them sooner.
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests