Fairbanks Morse magneto

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Fairbanks Morse magneto

Postby John *.?-!.* cub owner » Sun Aug 08, 2004 7:32 pm

Splicer (Rick Lehmann) the gentleman that provided my transportatin to Cubarama last year sent me the following inquiry about an FM magneto. If anyone can help him I would appreciate it.

I've got a magneto (FM X1B7E) that won't fire. It's off a Wisconsin engine (model AENL). I took it apart and I don't know how to remove the center shaft. Don't really want to remove it, but it's pretty dirty and has to come off.
Where can a guy find the disassembly/testing/installing procedeures for this rascal.......been looking high and low and cannot find it on the net, and really didn't want to buy a manual for this one project. I'm probably just not typing the correct phrase to get me where I need to go..

his email is splicer@fidnet
If you are not part of the solution,
you are part of the problem!!!

User avatar
Lurker Carl
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 3955
Joined: Mon Feb 03, 2003 9:54 am
Zip Code: 16685
Circle of Safety: Y
Location: PA, Todd

Postby Lurker Carl » Mon Aug 23, 2004 7:24 pm

John,

This may give you the info you need.

http://oldgravelys.net/pdf/Fairbanks_Morse_Magneto.pdf

Good luck.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Mon Aug 23, 2004 8:18 pm

Thanks Carl, he got it fixed last week. He said that once he figured out how to get it apart all it needed was cleaning and points.
If you are not part of the solution,
you are part of the problem!!!


Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 1 guest