This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

gravely rotary plow dirt shield

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
double R
10+ Years
10+ Years
Posts: 50
Joined: Sun Feb 12, 2006 8:19 pm
Location: Southern Ohio

gravely rotary plow dirt shield

Postby double R » Mon Feb 13, 2006 5:58 pm

I need the measurements for the dirt shield for the rotary plow. Mine don'
t have one and I am going to make one. I could questimate but it sure would be a lot better if I had the correct measurements and hole placement for the shield and for the brackets. Would be thankfull for reply's. Thanks. Ronnie.



:roll:
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Mon Feb 13, 2006 7:45 pm

DR- I have a new at home. If by tomorrow some else hasn't got it I'll post it for you.
Top
double R
10+ Years
10+ Years
Posts: 50
Joined: Sun Feb 12, 2006 8:19 pm
Location: Southern Ohio

Postby double R » Mon Feb 13, 2006 7:48 pm

Thanks W.K., I'll be on the look out for yours or any other posts. Thanks again.
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Wed Feb 15, 2006 2:00 pm

The plate is 12"x24". The strap holes are centered 3" off the long edge
5 1/2" apart. The straps are 8" long with a slot for added adjustment.
Top
double R
10+ Years
10+ Years
Posts: 50
Joined: Sun Feb 12, 2006 8:19 pm
Location: Southern Ohio

Postby double R » Wed Feb 15, 2006 7:36 pm

Thanks W.K. Poor. I have plowed before with this gravely but didn't like it because it threw the dirt out every where. This should make it better. I have a 49 Cub also that I really love. Again thanks ever so much. double R
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Wed Feb 15, 2006 10:14 pm

Dr- if your into Gravely's keep me in mind for parts. I have many,many I should liquidate.
Top
Post Reply

Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 14 guests