Page 1 of 1
Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 9:43 am
by Bezirk
I will have available for use the following tools
Loaded battery tester
Front seal removal / installation tool
Carb straightening plate
Spark plug spark tester
Digital meter
Analog meter
And misc. other tools.
looking forward to seeing all of the gang at Cecil's .
Berlin
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 9:55 am
by Bob McCarty
Berlin, I'm bringing my appetite.
See you next week.
Bob
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 11:10 am
by ScottyD'sdad
I'll bring a few tools, and my appetite, too! Ed
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 6:20 pm
by Bezirk
Do we have a projects list yet ? I possibly have overlooked it, I'm anxious to get some grease on my hands .
Berlin
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 6:36 pm
by Cecil
Nothing massive as of yet. A bunch of small stuff. If we get bored we could do a transmission change. How about putting the ear braces on as a demo. I forgot what we needed but if you remember I'll pick it up.
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 6:41 pm
by Peter Person
Berlin,
You are more than welcome to work with me on changing the gear lube in my finals. I have new gaskets & gear lube. The stuff coming out ought to be rather pungent.
...of course Ed will be getting his fingers greasy from the cider donuts
Looking forward to next weekend - just don't know when we will arrive.
Peter
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 6:51 pm
by Bill Hudson
Cecil,
I've been up to my eyeballs in numerous projects and have not gotten to freeing up the valves on the Lo-Boy I brought to the Tug. Is that a project that would work for CubFest Northeast?
Bill
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 7:04 pm
by Don McCombs
Peter Person wrote:Berlin,
You are more than welcome to work with me on changing the gear lube in my finals. I have new gaskets & gear lube. The stuff coming out ought to be rather pungent.
...of course Ed will be getting his fingers greasy from the cider donuts
Looking forward to next weekend - just don't know when we will arrive.
Peter
Peter,
Don't forget some Indian Head gasket sealer.
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 8:19 pm
by ScottyD'sdad
Rudi is bringing a stuck engine that he and I will be fighting with, so, Peter, there will be engine lube,mixed with the donut lube, on my hands! No thanks, I don't need aged final drive lube, added to the mix!
Ed
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 9:00 pm
by Peter Person
Don McCombs wrote:Peter Person wrote:Berlin,
You are more than welcome to work with me on changing the gear lube in my finals. I have new gaskets & gear lube. The stuff coming out ought to be rather pungent.
...of course Ed will be getting his fingers greasy from the cider donuts
Looking forward to next weekend - just don't know when we will arrive.
Peter
Peter,
Don't forget some Indian Head gasket sealer.
Don,
I'm assuming there is a good reason to use this over something else with the cork type gasket kit that I got from TM.
What are the advantages over an RTV Silicone?
Peter
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 10:08 pm
by Don McCombs
Just personal preference, I guess. Never had one leak after using it.
Re: Tools I will bring to NE Fest
Posted: Fri Oct 04, 2013 10:12 pm
by Bill Hudson
Don McCombs wrote:Just personal preference, I guess. Never had one leak after using it.
You betcha! Works for me as well.
Bill
Re: Tools I will bring to NE Fest
Posted: Sat Oct 05, 2013 4:17 am
by Cecil
Go ahead and bring it Bill. Might want to get a head gasket so we can pull the head.
Re: Tools I will bring to NE Fest
Posted: Sat Oct 05, 2013 10:23 am
by Bezirk
I will pick up the hardware to install the braces . Peter I'll be glad to help , also if anyone has electrical issues
We can tackle those . ( Why was I dumb enough to say I'm ready to get my hands greasy ? ) Paula is not coming with me , Norman , a good friend is coming , he is a dyed in the wool IH man and likes to chat and joke .
Berlin
Re: Tools I will bring to NE Fest
Posted: Sat Oct 05, 2013 6:39 pm
by tst
Any parts needed let me know, just parted a 74 cub, have parts and implements, any strange tools needed just ask, I can bring most what is needed, looking forward to seeing every one in a few days
Tim