Page 1 of 2

2nd Mid Missouri Showme CubFest - May 18th

Posted: Wed Apr 10, 2013 5:53 am
by midmo
It is getting closer to May 18. Had a great turn out last year and hoping for the same this year. See you all soon.
Ron in Mid Missouri

Re: 2nd Mid Missouri Showme CubFest

Posted: Wed Apr 10, 2013 8:14 am
by Eugene
Ron: Do you have a list of needed tools, equipment, supplies for the fest?

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Wed Apr 10, 2013 5:16 pm
by midmo
Don't have any projects at this time. If anyone has something let me know. Last year we replaced a clutch and work on a couple of electrical issues.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Wed Apr 10, 2013 8:23 pm
by cub47
I'll be there Ron, looking forward to it.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Fri Apr 12, 2013 10:03 pm
by John *.?-!.* cub owner
I could bring one that needs a rear main engine seal, or one that needs the reverse idler bushing (I think), but considering the distance it is cheaper to do it at home.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Wed May 01, 2013 5:40 am
by midmo
Just a reminder a little over two weeks away. Still looking for projects.
Ron in Mid Missouri

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Thu May 02, 2013 7:23 am
by Eugene
Someone have a plasma cutter they would be willing to demonstrate?

Anyone need a "how to" demonstration?

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Sat May 11, 2013 6:14 am
by midmo
Count down. Seven days to go. Any question please let me know.
Ron in Mid Missouri

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Sat May 11, 2013 9:01 am
by John *.?-!.* cub owner
Eugene wrote:Someone have a plasma cutter they would be willing to demonstrate?

Anyone need a "how to" demonstration?
I would like to see one demonstated

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Sat May 11, 2013 1:29 pm
by midmo
I would too John. I called all the rental places in Jefferson City and they do not have any to rent ether.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Sat May 11, 2013 3:19 pm
by Eugene
I'll bring the small plasma cutter, 110 volt AC powered, son recently picked up at auction, an auto-darkening welding helmet with adjustable shade control and some scrap metal to cut. If any one has an auto-darkening welding helmet, bring it along.

I'm hoping someone has a larger plasma cutter since the one son picked up is only rated at 1/8" thick cut.

Any way, if someone has experience with a plasma cutter - instructions and hands on help, please. Also want to see gouging with the plasma cutter demonstrated.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Mon May 13, 2013 8:20 pm
by randallc
Ron, need an address and what is the nearest motel. Will anybody be around Friday afternoon? Gary and me are planning on being there.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Mon May 13, 2013 9:12 pm
by John *.?-!.* cub owner
While tilling my garden the pin wore off my pto shifter, and as a result it destroyed the splines on the clutch sleeve and the transmission shaft. If you don't have any projects yet, i can bring it and we can change the transmission shaft. or I can watch it done from my recliner. :lol:

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Mon May 13, 2013 9:18 pm
by Eugene
https://sites.google.com/site/midmoshowmecubfest/

Above link to Ron's address and one hotel listed. If that hotel is full, Jefferson City, Mo. is about 20 miles east. Lots of hotels there.

Re: 2nd Mid Missouri Showme CubFest - May 18th

Posted: Mon May 13, 2013 9:29 pm
by randallc
Thanks Eugene.