Lost & Found at Stonethrow

Thu Oct 11, 2012 5:07 am

I have found the following, please let me know if it belongs to you.

One Stonethrow cap with a 501 pin and Button.

One cake carrier (Tupperware type)

One carving knife

One white plate (China)

I haven't gotten around to the tools yet but just glancing over them I don't see any extras so far :mrgreen: Hope to sort them all out this weekend and get them back on the boards.

Ron

Re: Lost & Found at Stonethrow

Thu Oct 11, 2012 9:19 am

Ron, I left the lift rod for Jan's tractor in front of the shop. Very rusty, ends are worn and welded. I will get it someday. lol

Re: Lost & Found at Stonethrow

Thu Oct 11, 2012 5:34 pm

Dale,
I did find that rod and I hung it up with my 2 rods on the chain board next to the door. It is safe :D

Ron

Re: Lost & Found at Stonethrow

Thu Oct 11, 2012 8:32 pm

Ron, I left a blue folding chair. I knew when Sam asked me to hold it out for him that we would forget it. So I can't say I was surprised not to find it when we got home.

Re: Lost & Found at Stonethrow

Mon Oct 15, 2012 4:25 am

John,
I found your chair but it looks like I'm missing one of my Blue ones since yours wasn't mine!

I also seem to be missing 2 Husky sockets 9/16" and 13/16" deep well. They have 2 groves around the bottom with Husky written between the groves. I'm pretty sure that is all.

Re: Lost & Found at Stonethrow

Mon Oct 15, 2012 10:33 pm

Found my blue chair still looking for the 2 sockets.

Re: Lost & Found at Stonethrow

Tue Oct 16, 2012 7:57 pm

Hey Ron,

The StoneThrow cap with the 501 pin and the red button is mine...hold and I'll pick up soon.

Thanks again for a great weekend!

Corky



Kodiak wrote:I have found the following, please let me know if it belongs to you.

One Stonethrow cap with a 501 pin and Button.

One cake carrier (Tupperware type)

One carving knife

One white plate (China)

I haven't gotten around to the tools yet but just glancing over them I don't see any extras so far :mrgreen: Hope to sort them all out this weekend and get them back on the boards.

Ron