This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Stonethrow Projects
Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Stonethrow Projects
If you have a project you want to get taken care of at Stonethrow please list it here so we can make sure to get it on the board at the shop. Just be sure to get all the parts needed and it will get done I already have a couple , Dusty B. will need some assistance with a brake job and hydralic rebuild so we will need a couple of folks to head that up. So let me know who has what and I'll put it on the board.
Ron
Ron
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- 10+ Years
Re: Stonethrow Projects
Ron, I also need a TC block Rebuild/flush for Jan's cub. It is working fine still but has all that brass floating around. I will get a kit.
I also have a motor with stuck valves. I need to check the valve seats, rings and bearings etc. I know we would need an engine stand, I have a hone for the cylinder walls, will need (plastiguage?), and I am not sure what else.
Is this a possibility?
I also have a motor with stuck valves. I need to check the valve seats, rings and bearings etc. I know we would need an engine stand, I have a hone for the cylinder walls, will need (plastiguage?), and I am not sure what else.
Is this a possibility?
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Re: Stonethrow Projects
Got you covered on the engine stand !
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Re: Stonethrow Projects
A couple Cubs showed up at my house while my wife was out of town - both need some minor stuff done:
hydraulic leak in the TC block
front spindle replacement
weird noise in the clutch
general checking over to see what I've gotten myself into this time
hydraulic leak in the TC block
front spindle replacement
weird noise in the clutch
general checking over to see what I've gotten myself into this time
"If every day were a holiday, sport would soon become chore"
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: Stonethrow Projects
Good I see we have a few things on tap.
I finally made my hotel reservations this evening so Bev and I are good to go.
I finally made my hotel reservations this evening so Bev and I are good to go.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Re: Stonethrow Projects
Looks like we may have 3 or so TC units to rebuild. Maybe we can get Phil to kinda oversee these projects since he did his not too long ago? So far things are shaping up very nicely!
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- Cub Pro
- Posts: 3421
- Joined: Fri Sep 24, 2004 9:02 pm
- Zip Code: 30543
- Tractors Owned: 1948 Cub
- Circle of Safety: Y
- Location: Ga. Gillsville
Re: Stonethrow Projects
Looks like Dale Finch will need a tranny seal so I'll add this to the project list
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Stonethrow Projects
I will probably have a Cub needing the mag repaired (broken mounting flange) and the governor timed. Don't ask how I managed to do that. I will also have a head to replace on it if it comes off easier than the one I had at CI.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 2779
- Joined: Sun Jul 01, 2007 10:07 pm
- Zip Code: 29518
- Circle of Safety: Y
- Location: SC, Cades 29518
Re: Stonethrow Projects
I can bring a donor case for that mag, rather than have someone try and weld that pot metal.
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Stonethrow Projects
Rick Spivey wrote:I can bring a donor case for that mag, rather than have someone try and weld that pot metal.
That sounds like a plan Rick.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 1629
- Joined: Mon Jan 29, 2007 7:09 pm
- Zip Code: 30114
- Tractors Owned: 1951 cub "Ms. Scarlett"
1962 Leora's loboy "Starburst" - Circle of Safety: Y
- Location: GA, Canton/Waleska
Re: Stonethrow Projects
Kodiak wrote:Looks like we may have 3 or so TC units to rebuild. Maybe we can get Phil to kinda oversee these projects since he did his not too long ago? So far things are shaping up very nicely!
i will help where I can Ron.
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Stonethrow Projects
I will have my sickle mower servicer if anyone needs to replace their cutting knives.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 2453
- Joined: Thu Mar 08, 2007 12:57 pm
- Zip Code: 30607
- Tractors Owned: Just One:
1957 Farmall Cub
"Corky"s Cub" - Location: Georgia, Jackson County
Re: Stonethrow Projects
Snuck up to Ron's over the weekend, and we both sat around and chilled more than worked! We got a little done for StoneThrow, but mostly just caught up on life a bit!
Then on Sunday, I cut grass around the pond with Mr. Harold's LoBoy. When I shut er down to move a log, ugh...a horrible screeching sound from the engine! I've got a sick feeling this ole feller has some engine work in his future! ...or maybe just a dry fan (I hope!)...Started it back up, and more squallin...
The front cover and oil pan need new gaskets and seals, he's blowing a good bit of carbon smoke, and he's gettin a little low on power (to be fair, the grass was over a foot high!). So I was planning to swap him over to 12-volt with pertronix this winter. But maybe first it's time to put the engine on a stand and go through it?
What do you guys think about having a look at Stonethrow?
Corky
Then on Sunday, I cut grass around the pond with Mr. Harold's LoBoy. When I shut er down to move a log, ugh...a horrible screeching sound from the engine! I've got a sick feeling this ole feller has some engine work in his future! ...or maybe just a dry fan (I hope!)...Started it back up, and more squallin...
The front cover and oil pan need new gaskets and seals, he's blowing a good bit of carbon smoke, and he's gettin a little low on power (to be fair, the grass was over a foot high!). So I was planning to swap him over to 12-volt with pertronix this winter. But maybe first it's time to put the engine on a stand and go through it?
What do you guys think about having a look at Stonethrow?
Corky
I found this old Cub, Forgotten and Forlorn,
With pistons and valves frozen and worn.
Help from my buddies on Farmallcub.com,
And an engine from Ralph, (37’s the one),
Now ole Corky is running and back to life,
Much to the surprise of my dear, dear wife!
With pistons and valves frozen and worn.
Help from my buddies on Farmallcub.com,
And an engine from Ralph, (37’s the one),
Now ole Corky is running and back to life,
Much to the surprise of my dear, dear wife!
-
- 10+ Years
Re: Stonethrow Projects
Sounds good to me corky, I may know what I am doing after the 2nd one. lol
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Stonethrow Projects
Last time my Cub squealed, it was a locked up fan bearing!
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Bash Projects
by Barnyard » Mon May 31, 2021 2:18 pm » in CubFest and Tractor Show Announcements & Discussions - 10
- 675
-
by Greenthumbfarms
Wed Jun 02, 2021 2:56 pm
-
-
-
Bash Projects - 2023
by Barnyard » Sun May 21, 2023 9:02 am » in CubFest and Tractor Show Announcements & Discussions - 3
- 1280
-
by cubbrian
Tue May 23, 2023 10:10 am
-
-
-
Shallow Creek Projects
by Barnyard » Mon Oct 11, 2021 5:25 pm » in CubFest and Tractor Show Announcements & Discussions - 0
- 300
-
by Barnyard
Mon Oct 11, 2021 5:25 pm
-
-
-
Shallow Creek CubFest Projects
by Barnyard » Sat Oct 14, 2023 8:01 pm » in CubFest and Tractor Show Announcements & Discussions - 7
- 1025
-
by cdahl383
Wed Oct 18, 2023 7:28 am
-
Return to “CubFest and Tractor Show Announcements & Discussions”
Who is online
Users browsing this forum: No registered users and 1 guest