Wed Feb 29, 2012 3:26 pm
List of projects We need to get this started , The order of repairs WILL be at my discretion
Wed Feb 29, 2012 4:06 pm
I'll have a sickle servicer along so bring your cutter bar, new blades and rivets.
I've not shopped around but our local TSC has new blades for around $20, they sell the rivets also.
Wed Feb 29, 2012 7:07 pm
1. Hang the beam....
2. Mount the trolleys....
Wed Feb 29, 2012 11:11 pm
as long as i can get time off from work, mabye a touch control rebuild on my super a?
as slow as i am david we might just have to settle up at the fest hahaha
Wed Feb 29, 2012 11:13 pm
If thats what it takes
Thu Mar 01, 2012 12:01 am
I woul like to see Bob reline some brakes, I might have some to do but i will have to see if i can find them. How much dose a shoe kit cost Bob?
Thu Mar 01, 2012 6:10 am
I need help with the mag on my 52R combine (cub power unit) engine. At the least it needs points and condenser--Put a new coil in a couple years ago. I seem to always get the point gap off.....I am sure someone has a "trick" I could learn to make the job easier.
The power unit will ride nicely in the back of my truck, if there was interest I could bring the whole engine....it's just about as easy to take the engine off as it is trying to get wedged up between the combine frame and the engine to get to the mag!
I won't be able to get off from school but I will be there early Saturday morning.
Thu Mar 01, 2012 7:38 am
I like the build the hoist plan, we are only going to use it to lift tractor stuff, right Boss????????????? Tractors not yankees????
Thu Mar 01, 2012 8:46 am
Joe Malinowski wrote:I like the build the hoist plan, we are only going to use it to lift tractor stuff, right Boss????????????? Tractors not yankees????
We cut the hanging tree down 4 or 5 years ago joe
Thu Mar 01, 2012 8:47 am
may have been a bit longer than that, was about the time , we started raising hogs
Thu Mar 01, 2012 10:34 am
Clint, Reline kits are $25. I'll plan on bringing the stuff.
Thu Mar 01, 2012 9:47 pm
If you think there would be time, and if I haven't done it before the Fest, I would like to do a rear split to replace the front transmission bearing/seal, etc. The person buying the '55 from me MAY be coming to check out the whole Cub thing, too!!
Thu Mar 01, 2012 10:33 pm
BDFinch wrote:If you think there would be time, and if I haven't done it before the Fest, I would like to do a rear split to replace the front transmission bearing/seal, etc. The person buying the '55 from me MAY be coming to check out the whole Cub thing, too!!
Never heard a cub buyer called a person
Sat Mar 17, 2012 8:39 pm
Looks like I may bring the '55 I sold for a rear seal change, if possible. The "person", AKA Larry, who bought the cub, asked me to do some work on it. I am replacing the radiator which I just removed today, as well as rebuilding the steering gear housing. Both developed leaks after running for a while the day I delivered it! Guess all that gunk I cleaned out of both was what was plugging the leaks!!! Just received the new Clancey radiator in the mail. May see what a recore would cost and keep one as a spare...(I now have two "spares" if anyone wants to buy one)
Sat Mar 17, 2012 9:38 pm
We will be rebuilding [rings and bearing ] a WV cub on Friday If we have time we may get to the 55
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.