List of projects

[Boss Hog]

List of projects We need to get this started , The order of repairs WILL be at my discretion
Boss

[Yogie]

I'll have a sickle servicer along so bring your cutter bar, new blades and rivets.
I've not shopped around but our local TSC has new blades for around $20, they sell the rivets also.

[Bob McCarty]

1. Hang the beam....
2. Mount the trolleys....

Bob

[Olred]

as long as i can get time off from work, mabye a touch control rebuild on my super a? as slow as i am david we might just have to settle up at the fest hahaha

[Boss Hog]

If thats what it takes

[Clint Carter]

I woul like to see Bob reline some brakes, I might have some to do but i will have to see if i can find them. How much dose a shoe kit cost Bob?

[Super A]

I need help with the mag on my 52R combine (cub power unit) engine. At the least it needs points and condenser--Put a new coil in a couple years ago. I seem to always get the point gap off.....I am sure someone has a "trick" I could learn to make the job easier.

The power unit will ride nicely in the back of my truck, if there was interest I could bring the whole engine....it's just about as easy to take the engine off as it is trying to get wedged up between the combine frame and the engine to get to the mag!

I won't be able to get off from school but I will be there early Saturday morning.

Al

[Joe Malinowski]

I like the build the hoist plan, we are only going to use it to lift tractor stuff, right Boss????????????? Tractors not yankees????

[Boss Hog]

I like the build the hoist plan, we are only going to use it to lift tractor stuff, right Boss????????????? Tractors not yankees????

We cut the hanging tree down 4 or 5 years ago joe

[Boss Hog]

may have been a bit longer than that, was about the time , we started raising hogs

[Bob McCarty]

Clint, Reline kits are $25. I'll plan on bringing the stuff.

Bob

[Dale Finch]

If you think there would be time, and if I haven't done it before the Fest, I would like to do a rear split to replace the front transmission bearing/seal, etc. The person buying the '55 from me MAY be coming to check out the whole Cub thing, too!!

[Boss Hog]

If you think there would be time, and if I haven't done it before the Fest, I would like to do a rear split to replace the front transmission bearing/seal, etc. The person buying the '55 from me MAY be coming to check out the whole Cub thing, too!!

Never heard a cub buyer called a person

[Dale Finch]

Looks like I may bring the '55 I sold for a rear seal change, if possible. The "person", AKA Larry, who bought the cub, asked me to do some work on it. I am replacing the radiator which I just removed today, as well as rebuilding the steering gear housing. Both developed leaks after running for a while the day I delivered it! Guess all that gunk I cleaned out of both was what was plugging the leaks!!! Just received the new Clancey radiator in the mail. May see what a recore would cost and keep one as a spare...(I now have two "spares" if anyone wants to buy one)

[Boss Hog]

We will be rebuilding [rings and bearing ] a WV cub on Friday If we have time we may get to the 55

Boss