Page 1 of 1
Cubfest NE projects
Posted: Wed Aug 24, 2011 9:15 am
by Cecil
Anyone with projects for Cubfest NE please post here and I will make a list.
Re: Cubfest NE projects
Posted: Wed Aug 24, 2011 8:08 pm
by Bezirk
I would like to removet the exhaust pipe (vertical) from the manifold and rethread the manifold. Please let me know if anyone will have a tap, if not I'll buy or make one prior the Fest.
Thanks, Berlin
Re: Cubfest NE projects
Posted: Thu Aug 25, 2011 7:29 am
by ScottyD'sdad
I can bring a tap. Ed
Re: Cubfest NE projects
Posted: Thu Aug 25, 2011 11:08 am
by Cecil
I'll pick up some blades for the sawsall
Re: Cubfest NE projects
Posted: Sat Aug 27, 2011 4:21 pm
by Bezirk
Thanks guys, I'll bring some specialty tools and my electrical/ electronic tools, please let me know if ther is anything in particular that you want me to bring in the tool line. It looks like we will have a good crew of folks there and, just maybe Jeremy and Anna will want to stay in the RV instead of freezing like last year ! looking forward to the "Fest".
Berlin
Re: Cubfest NE projects
Posted: Sun Aug 28, 2011 8:37 pm
by Bezirk
I forgot to mention, that I have a front crank pulley puller from Earl, I'll bring that also.
Berlin
Re: Cubfest NE projects
Posted: Fri Sep 16, 2011 3:44 pm
by Bezirk
I have a final drive that needs to have a bolt hole welded and re threaded . Will anyone have the jig for that procedure at NE Cub Fest ?
Thanks, Berlin
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 12:57 pm
by Winfield Dave
Bezirk wrote:I have a final drive that needs to have a bolt hole welded and re threaded . Will anyone have the jig for that procedure at NE Cub Fest ?
Thanks, Berlin
Berlin...I didn't see a response here to your question.
I just got one at this years' Tug...Do you want me to bring it?
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 1:01 pm
by Winfield Dave
Cecil wrote:Anyone with projects for Cubfest NE please post here and I will make a list.
Looks like an "easy" weekend Cecil ?
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 1:21 pm
by Peter Person
Winfield Dave wrote:Cecil wrote:Anyone with projects for Cubfest NE please post here and I will make a list.
Looks like an "easy" weekend Cecil ?
Dave,
We have to get up and running;
Peter
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 1:22 pm
by Winfield Dave
OK...that's Friday morning....what about the rest of the weekend???
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 8:03 pm
by EarlyCub49
I was thinking about changing my governor, has a crack in the housing, and have Cecil check out my
carb, also I have to have my touchcontrol stop adjusted, just can't seem to get it right myself.
need to look at the clutch fingers, and learn where the adjustments exactly are.
Bruce T.
Re: Cubfest NE projects
Posted: Fri Sep 30, 2011 8:21 pm
by Cecil
Well it looks like the projects are starting to build.
Re: Cubfest NE projects
Posted: Tue Oct 04, 2011 8:25 am
by Bezirk
I will be bringing a left side final drive that needs a bolt hole repaired. Thanks to Dave Winfield , who will be bring the template for alignment of the new hole. I do not have the expertise to do the repair, I assume one would braze in the broken area and rethread it.I hope to learn from someone at NE Fest how to make this repair.
Berlin
Re: Cubfest NE projects
Posted: Tue Oct 04, 2011 8:47 am
by danovercash
I have an early '70's final with good bolt holes, but needs crack (6') across top repaired. Can be had for cost of transportation. Cub Express maybe? Not broken off, just cracked from brake rod area to top.