Cubfest NE projects

[Cecil]

Anyone with projects for Cubfest NE please post here and I will make a list.

[Bezirk]

I would like to removet the exhaust pipe (vertical) from the manifold and rethread the manifold. Please let me know if anyone will have a tap, if not I'll buy or make one prior the Fest.
Thanks, Berlin

[ScottyD'sdad]

I can bring a tap. Ed

[Cecil]

I'll pick up some blades for the sawsall

[Bezirk]

Thanks guys, I'll bring some specialty tools and my electrical/ electronic tools, please let me know if ther is anything in particular that you want me to bring in the tool line. It looks like we will have a good crew of folks there and, just maybe Jeremy and Anna will want to stay in the RV instead of freezing like last year ! looking forward to the "Fest".
Berlin

[Bezirk]

I forgot to mention, that I have a front crank pulley puller from Earl, I'll bring that also.
Berlin

[Bezirk]

I have a final drive that needs to have a bolt hole welded and re threaded . Will anyone have the jig for that procedure at NE Cub Fest ?
Thanks, Berlin

[Winfield Dave]

I have a final drive that needs to have a bolt hole welded and re threaded . Will anyone have the jig for that procedure at NE Cub Fest ?
Thanks, Berlin

Berlin...I didn't see a response here to your question.
I just got one at this years' Tug...Do you want me to bring it?

[Winfield Dave]

Anyone with projects for Cubfest NE please post here and I will make a list.

Looks like an "easy" weekend Cecil ?

[Peter Person]

Anyone with projects for Cubfest NE please post here and I will make a list.

Looks like an "easy" weekend Cecil ?

Dave,
We have to get up and running;


Peter

[Winfield Dave]

OK...that's Friday morning....what about the rest of the weekend???

[EarlyCub49]

I was thinking about changing my governor, has a crack in the housing, and have Cecil check out my
carb, also I have to have my touchcontrol stop adjusted, just can't seem to get it right myself.
need to look at the clutch fingers, and learn where the adjustments exactly are.

Bruce T.

[Cecil]

Well it looks like the projects are starting to build.

[Bezirk]

I will be bringing a left side final drive that needs a bolt hole repaired. Thanks to Dave Winfield , who will be bring the template for alignment of the new hole. I do not have the expertise to do the repair, I assume one would braze in the broken area and rethread it.I hope to learn from someone at NE Fest how to make this repair.
Berlin

[danovercash]

I have an early '70's final with good bolt holes, but needs crack (6') across top repaired. Can be had for cost of transportation. Cub Express maybe? Not broken off, just cracked from brake rod area to top.