This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Belt Driven equipment for Farmalls
-
hatchet
- 10+ Years
- Posts: 38
- Joined: Tue Mar 06, 2007 7:41 pm
Belt Driven equipment for Farmalls
Are there any companies making equipment that runs off of belt drive. I have the gear box and pulley that fits my Farmall 140. Mostly I'd like to grind whole corn for animal feed. I also have the rear corn planter and a few seed plates and the cultivators. I plan on feeding goats and chickens. Any other ideas are welcome.
-
Bob McCarty
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Belt Driven equipment for Farmalls
I just Googled "corn grinder", "corn mill", etc. and you'll find some leads and also some eBay ads. With the rotational speed and reverse direction of the Cub, I doubt you'll find anything new but may find something used that will fulfill your needs.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Belt Driven equipment for Farmalls
Bob McCarty wrote:With the rotational speed and reverse direction of the Cub, I doubt you'll find anything new
Bob, you can twist the belt. That is what you have to do with a 4-e hammer mill.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
Bob McCarty
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Belt Driven equipment for Farmalls
Barnyard wrote:Bob McCarty wrote:With the rotational speed and reverse direction of the Cub, I doubt you'll find anything new
Bob, you can twist the belt. That is what you have to do with a 4-e hammer mill.
You're right, wasn't thinking about that since I don't have one.
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: No registered users and 7 guests
