Started cleaning off old paint and grass.
Cutting new metal to weld in underneath the deck.
Making my own custom ag spindle wheels for the deck.
Hopefully soon i will have it all welded up and painted before the grass stops growing!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Saved a c-3 mower from scrap pile, redoing for my lo boy!
-
Rothgardens
- 5+ Years
- Posts: 35
- Joined: Tue Oct 28, 2014 7:54 pm
- Zip Code: 08721
- Tractors Owned: 1955 Cub loboy
1950 Cub
1958 Wheel Horse RJ 58
1979 John Deere 950 - Location: Bayville, NJ
Saved a c-3 mower from scrap pile, redoing for my lo boy!
Pulled a C-3 Mower out of a Guys scrap pile. He said it was to far gone for him to repair. It came with mule drive pulleys and everything!
Started cleaning off old paint and grass.
Cutting new metal to weld in underneath the deck.
Making my own custom ag spindle wheels for the deck.
Hopefully soon i will have it all welded up and painted before the grass stops growing!
Started cleaning off old paint and grass.
Cutting new metal to weld in underneath the deck.
Making my own custom ag spindle wheels for the deck.
Hopefully soon i will have it all welded up and painted before the grass stops growing!
Low Budget Tractor!-
Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Saved a c-3 mower from scrap pile, redoing for my lo boy
Way to go! It's not too far gone, just too far gone for the PO. If you're at the level where you'll replace bad sheet metal with good, then almost nothing is too far gone for you!
Looking forward to more pictures of your project. Keep going...
Looking forward to more pictures of your project. Keep going...
Stanton
-
BullDAWG
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: Saved a c-3 mower from scrap pile, redoing for my lo boy
can't wait to see it finished...
"The nine most terrifying words in the English language are: I'm from the GOVERNMENT and I'm here to HELP."
"I DON'T believe in a government that protects US from OURSELVES." R. Reagan
-
Rothgardens
- 5+ Years
- Posts: 35
- Joined: Tue Oct 28, 2014 7:54 pm
- Zip Code: 08721
- Tractors Owned: 1955 Cub loboy
1950 Cub
1958 Wheel Horse RJ 58
1979 John Deere 950 - Location: Bayville, NJ
Re: Saved a c-3 mower from scrap pile, redoing for my lo boy
Got mower cutting again! Everything ran good just need to paint it up, and install cover plates.
Low Budget Tractor!-
BullDAWG
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: Saved a c-3 mower from scrap pile, redoing for my lo boy
Rothgardens wrote:Got mower cutting again! Everything ran good just need to paint it up, and install cover plates.
Glad to see it working again, but the 2 things I wanted to now see is ...
1) Those wheels you looked like you were going to mount on the mower in the first pictures where you made custom brackets...
2) I GOTTA SEE MORE PICS OF THAT CUP HOLDER!!!! (the one by the steering wheel) I want to make that n would love to see pics of it and how you made it. I now want cup holders added to my 2 cubs and to my Super A....
"The nine most terrifying words in the English language are: I'm from the GOVERNMENT and I'm here to HELP."
"I DON'T believe in a government that protects US from OURSELVES." R. Reagan
-
Rothgardens
- 5+ Years
- Posts: 35
- Joined: Tue Oct 28, 2014 7:54 pm
- Zip Code: 08721
- Tractors Owned: 1955 Cub loboy
1950 Cub
1958 Wheel Horse RJ 58
1979 John Deere 950 - Location: Bayville, NJ
Re: Saved a c-3 mower from scrap pile, redoing for my lo boy
One: wheels came on mower deck, i was just making a set for this one. But the one hit the oil pan so i cut them off and i'm just using the skids.
Two: Cup holder is a piece a basketball pole cut and welded to a piece of angle iron. u bolt holds it on, a cozy adds insulation and minor suspension.
Two: Cup holder is a piece a basketball pole cut and welded to a piece of angle iron. u bolt holds it on, a cozy adds insulation and minor suspension.
Low Budget Tractor!Who is online
Users browsing this forum: No registered users and 3 guests
