IH 200 Manure Spreader

[Tims0566]

I have a IH 200 manure spreader, and I'm looking for the bearing seat on the paddle, the casting has part number looks like 8321 or 3321. It just broke and I don't want to damage the spreader, as its in 90% original state, with only one little patch.

[Jim Becker]

I don't have the parts catalog for the #200. The corresponding part on a #100 is 3321S. That part was used on some other spreaders, probably is right for the #200. Number was replaced with 3321SA.

[Bob McCarty]

Jim is correct on the 3321SA. If you can't find a new one, let me know. I have parts of a 200 in the barn loft that I can look through.

Bob

[Tims0566]

Thanks Bob, if you have one let me know, living out here in the Pacific Northwest. It's almost impossible to find those old parts.

[Bob McCarty]

Found one that has a rounded flange (round on one side, square corners opposite) and one that has a square flange. Could you check and see what yours was like?

Bob

[Tims0566]

The one I need is the round side and opposite side square corners, I tried to take picture, but it's to big to upload. My email is tims0566@msn.com. If you email me I can send you the pictures.

[BullDAWG]

The one I need is the round side and opposite side square corners, I tried to take picture, but it's to big to upload. My email is tims0566@msn.com. If you email me I can send you the pictures.

If my pics are toooo big to upload I edit them in paint (microsoft program that came on my computer, or download free photo editing software online) then usually all you need to do is reduce the size (ie from 100% to 70%) make a copy if you want the high res original. Then check the size of the file and reduce it till its small enough to upload. You can also change it to different formats and reduce the # of colors and that reduces the file size too. (ie change it to a ".gif " file etc...)