On a regular basis we are cleaning up tree branches and tops from downed trees or firewood logs.
I had been thinking about making a set of brush/debris forks for some time now to make the job easier.
Initially they were going to be a stand alone device using the 2 normal loader attachment pins,
similar to my boom pole and pallet forks.
Instead, designed them to slip over the loader bucket cutting edge and anchor with two 1/2" bolts in the rear.
They work really well. Branches can be scooped off the ground without leaving the seat.
Conveniently, there is a chain hook welded to the top of my bucket in the center.
A short piece of heavy chain hooked to it and thrown over the top of the load acts as a hold-down for unruly branches or when transporting a long distance.
Some more testing needs to be done before the paint gets added.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Loader Brush Forks
- Winfield Dave
- 10+ Years
- Posts: 3560
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Loader Brush Forks
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Loader Brush Forks
Very nicely done and well thought out design!! But then, I'd expect nothing less...
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
- Winfield Dave
- 10+ Years
- Posts: 3560
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Loader Brush Forks
Ed...My design for the stand-alone version was probably going to have a manually operated "claw" (thumb) pivoting from the top.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
- Winfield Dave
- 10+ Years
- Posts: 3560
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Loader Brush Forks
Had to do some branch cleanup today, so I got some pics of the painted forks before I roughed them up.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
- Dale Finch
- 10+ Years
- Posts: 6683
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Loader Brush Forks
I sure could use one of those, too...when can you be here with it??!!!
Who is online
Users browsing this forum: No registered users and 4 guests